shrekmoose
Newbie
- Joined
- May 14, 2011
- Messages
- 33
- Reaction score
- 2
So I just came over from the colorado and canyon midsize scene. Decided I was over a truck payment sold my new canyon and bought a 92 model ext. Cab 5sp 350 truck. My question is how close to the same are the front suspensions of these trucks? I had a z71 canyon which also has torsion bars and mine were cranked almost 4 inches. Now with that being said my cv angles and all were almost at stock angles alot of the guys including me were running spacers on the 4 bolts that held the diff up under the truck. What is stopping us from doing that to these fullsizes? From what I can crawl up under and look and see they look pretty similar. Also we were flipping our ball joints to the underside of the UCA and running about a 1/4 or 1/2 inch spacer between the UCA and the ball joint which helped alot with alignment issues. Just figgured I would throw the idea out and see what happens. I searched and really didn't find a whole lot of anything on this. So any and all insight would be awesome