any one running quad tips like a vett?

[LOWnEASY]

Been pondering the idea of quad tips like a vett with a roll pan.
Either a smooth pan with 4 tips flush in the middle spaced out like the vetts or a c5 type pan with out the tail lights and 4 tips in the middle.
I'm slammed in the back so I think it would look pretty sweet with quad 3 or 4" tips
So, any one seen this or some this?

 

[Parentnoia]

I've actually considered a turbo setup similiar to a vette (that's why how they have four actual tips instead of two dual tips). I'd dump two at the axle and extend two to the back.

 

[1998K1500]

I think it could look cool. I was gonna do it if I did a whole custom exhaust actually but instead I went with a Flowmaster kit and used their dual side exit tips.

 

[sewlow]

http://t2.gstatic.com/images?q=tbn:ANd9GcTY4MN806zi9BzqJZZJpPtHuAkPgi6GrS0IsYWZnYxyigeuS1TIwg

http://www.bbexhaust.com/car/cts-v-coupe/images/cts-v-coupe-exhaust-detail-1.jpg

 

[Parentnoia]

What he wants:

You must be registered for see images

What I'm referencing:

You must be registered for see images

 

[LOWnEASY]

Yea, the 4 tips. Even dump the entire exhaust at the axle or were ever, and have some dummy tips just for looks. Even just some two flows with single in dual out would work and should be fairly easy to run some pipes to the tips.
The only hang up I'm running into is a roll pan with the center cut that looks right. (Were the plate goes)