10/14/2019
Mileage: 156,220
Replaced the front brakes
ACDelco Semi Metallic Pads
$13.72
ACDelco 14D369MX
ACDelco Front Rotors
$53.89 (x2)
ACDelco 18A503A
Timken Inner Wheel Bearings
$5.39 (x2)
Timken SET3
Timken Outer Wheel Bearings
$5.96 (x2)
Timken SET5
Timken Wheel Seals
$1.28 (x2)
Timken 4739
Also changed the oil ($23; next at 160,000) and added freon ($7 can, $140 rental for the gauges) was short cycling, my neighbor's manifold gauges were showing 90 psi low side so I stopped adding last time. Rented a set of gauges from Vatozone and while adding freon, the low side was between 30 and 40 and the high side was around 150-160. Seemed good. Honestly could use a little more I think. The compressor cycles more frequently than I'd like. But, I'm going to have a shop mess with the system before the summer. I don't know nearly enough about AC to get it working properly.
Mileage: 156,220
Replaced the front brakes
ACDelco Semi Metallic Pads
$13.72
ACDelco 14D369MX
ACDelco Front Rotors
$53.89 (x2)
ACDelco 18A503A
Timken Inner Wheel Bearings
$5.39 (x2)
Timken SET3
Timken Outer Wheel Bearings
$5.96 (x2)
Timken SET5
Timken Wheel Seals
$1.28 (x2)
Timken 4739
Also changed the oil ($23; next at 160,000) and added freon ($7 can, $140 rental for the gauges) was short cycling, my neighbor's manifold gauges were showing 90 psi low side so I stopped adding last time. Rented a set of gauges from Vatozone and while adding freon, the low side was between 30 and 40 and the high side was around 150-160. Seemed good. Honestly could use a little more I think. The compressor cycles more frequently than I'd like. But, I'm going to have a shop mess with the system before the summer. I don't know nearly enough about AC to get it working properly.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach