What all do i need to preform the swap?
I've read a little bit have a few questions.
Will my stock 4l60 work with correct spacers and flex plate?
Will I have the trams shift points changed from stock?
Any links or threads that can help me would be awesome. I do plan on making the motor a standalone version if i can keep the stock trans in the truck.
Sent from my iPhone using Tapatalk
I'm not sure on your tranny questions but the swap is pretty straight forward.
Using
http://www.dirtydingo.com/shop/mobile_product_info.php?cPath=362&products_id=1367 your engine and trans will fall right into place and you can bolt up your np241c transfer case back up weather you use your old trans or if you had a new 4l60e.
You must be registered for see images attach
You must be registered for see images attach
Next swap out your tbi pump for the acdelco ep381 which will put out the required psi for the 5.3 and where your current fuel filter is you will mount the new fuel filter/regulator (Napa 3737)
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
The fuel system is easy. It just depends if your intake/Fuel rails are a return or returnless. Generally a 10 ft roll of - 6 braided hose from Russell and the 12 fittings (I can link if you need them) will get the fuel system all Wrapped up.
If your modify your own harness follow the lt1swap.com directions.. Or you can buy a already completed harness also.
What all do i need to preform the swap?
I've read a little bit have a few questions.
Will my stock 4l60 work with correct spacers and flex plate?
Will I have the trams shift points changed from stock?
Any links or threads that can help me would be awesome. I do plan on making the motor a standalone version if i can keep the stock trans in the truck.
Sent from my iPhone using Tapatalk
Sent from my throttle body injected galaxy note3