94 Silverado Body Droped full Tube Chassis IRS

[sick94]

heres a couple pics of the brakes i will be installing..... i plan on showing a step by step Modification & install with specs for this.
the brake calipers are off a 2000 corvette .
the front spindles are 88 to 98 obs 2" drop DJM.
94 silverado c1500 front brake rotors have these specs Outer dia: 11.69 Height:4.51 Norm Thickness:1.28 Min Thickness:1.22 Hub Reg:3.06 Bolt Circle :5x5.00
2000 corevette front brake rotors have these specs Outer dia: 12.79 Height: 1.79 Norm Thickness:1.26 Min Thickness: 1.19 Hub Reg:2.78 Bolt Circle: 5x4.75
when i get a chance to measure and design the brake brackets i will give all that info.

You must be registered for see images attach

You must be registered for see images attach

 

[454SSguy]

Can't wat to see this? Different rotor option would be awesome since powerslots for the SS trucks are $250+

 

[sewlow]

I had a bee-atch of a time trying to find a wheel I liked, that was available in 5X5 pattern. So many more options with a 5X4.75.

 

[sick94]

i got the corvette front rotors today.. now i can start doing some Lathe work on the stock truck front rotors to turn them into the new hub for the slip on style rotors

You must be registered for see images attach

You must be registered for see images attach

 

[454SSguy]

Take lots and lots of pictures with measurements!!!!

 

[ccreddell]

Conversely, it shouldnt be hard to redrill the rotors to 5" bolt pattern to slip fit the Vette rotors onto the truck hubs. Theres also a company that makes a hub for Impalla SS. If Im not mistaken, these will fit the truck spindle.

http://www.kore3.com/products.php?cat=15

 

[ccreddell]

OK, went and did a bit of research-it wasnt the Impala SS. It was the up to 72 Impala that shares the same inner and outer wheel bearings with our spindles. So it would be this one.

http://www.kore3.com/proddetail.php?prod=10075

 

[sick94]

very intresting thanks for adding to this project this will be a huge help for people with out a Lathe

OK, went and did a bit of research-it wasnt the Impala SS. It was the up to 72 Impala that shares the same inner and outer wheel bearings with our spindles. So it would be this one.

http://www.kore3.com/proddetail.php?prod=10075

 

[sick94]

update! more pics to come

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[Devs93]

need moar pics dont make us wait so long lol