93 Silverado 5.3L swap w/ 5 speed

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

91blkstpsd

OBS Enthusiast
Joined
Apr 29, 2010
Messages
59
Reaction score
11
Location
Hillsboro, TN
I've been tossing around the idea to sell or trade my 93. Would rather have cash but will entertain trades on other GM products either full trade or partial. Here's a list of mods:

Exterior:
new cab corners
new urethane cab mounts
steel cowl hood
shaved antenna, tailgate handle, stake pockets
steel rollpan molded into the bed
new chrome smoothie front bumper
94-98 GMC grille with billet installed
new clear glass headlights, clear parking lights, and amber corners
454SS style valance and fogs
6000K HIDs in low, high, and fogs
LEDs in all signal lights
Street Scene dual signal mirrors
Eagle Eyes LED tail lights that have been candied to look like stock
flush LED 3rd brake lights above back window
Light Quasar Blue Metallic with electric blue pearl on top
Bed Rug liner
Underside of bed and frame has been cleaned and undercoated
billet specialties license plate frame

Interior:
manual locks and windows
brushed billet trim on dash & doors
Billet steering wheel with half wrap painted to match truck
billet shifter
LED interior and dash lights
Aeroforce Interceptor scan gauge mounted on pillar
stock bench seat with arm rest and stock door panels
JVC head unit
Alpine 6.5" Components in kick panels
Alpine 4x6 in dash and pillars
2-10" Alpine Type S w/ 1000W Alpine amp

Suspension:
3" Belltech drop springs
2" Belltech drop spindles
Summit Racing drop shocks up front
6" DJM flip kit and notch out back
drop shackles
air shocks out back
cleaned and painted suspension parts
urethane sway bar end links
new lower ball joints

Wheels & Tires:
Coys C5 Gunmetal
20x8.5 with 245/40/20 Nexen tires
20X10 with 275/40/20 Nexen tires
Less than (3000 miles on all)

Engine & Trans: (*all parts are brand new except engine, trans, and fans)
2004 5.3L drive by wire
PSI stand alone harness
custom PCM tune
Transdapt adapter plates
urethane motor mounts
Schoenfeld long tube ceramic coated headers
3" exhaust into polished stainless SLP muffler
Bully cold air intake
Taylor 10mm plug wires
ACdelco plugs
valve cover gaskets
water pump
power steering line
temp and oil pressure sensors
serpentine belt
Josh Powers AC relocation bracket
6.0L engine covers
big block 34" radiator with black billet cap
2006 Silverado dual eletric fans
relay harness so fans work like stock
custom made radiator cover
all underhood plastics have been coated black for cleaner look
engine harness has been lengthened to tuck wires out of sight
custom pcm cover
NV3500 5 speed trans
tail shaft seal
4.8L flywheel
pressure plate
clutch
throwout bearing
pilot bearing
master cylinder
slave cylinder

Im asking $9500 obo

Feel free to email me.
[email protected]
 

91blkstpsd

OBS Enthusiast
Joined
Apr 29, 2010
Messages
59
Reaction score
11
Location
Hillsboro, TN
You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach
 

91blkstpsd

OBS Enthusiast
Joined
Apr 29, 2010
Messages
59
Reaction score
11
Location
Hillsboro, TN
Thanks guys! If any of yall are interested just make me an offer. Also be up for trade on a 2dr Tahoe/Yukon, another fullsize 2wd truck, LS1 car, etc. No s10 or compacts though.
 
Top