Hey guys, I figuring out the above wiring situation thanks to Brandon and other group members! It is great to have such help!
here is the ignition switch working..
xc_hide_links_from_guests_guests_error_hide_media
I am chugging along on the other wiring in the cab. I will use some of the original gauges and tap into them using this technique from Eric the car guy (see link below).. I am not going do a massive custom gauge package, I will just incorporate the missing gauges into the dash. I will re-use the original gas gauge and volt meter.
xc_hide_links_from_guests_guests_error_hide_media
The engine is getting closer to being done, I bought a Edelbrock # 2104 intake manifold for my TBI heads and it fits well. The engine builder also changed the valve seals as the ones that came in the kit were too small. I am hoping to have the cab wired and perhaps the rear of the truck wired by the end of May..
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach