6 in TOTAL on 285's

[Swims350]

wow pics of my 2 fav. trucks and my fav. stance, block and crank with BL and 35's.

 

[96k1500]

Have you found a body lift for your truck yet Chris?

 

[Z71LOVE]

when my truck was stock it had a little cali lean already so that is the reason i put 3 in blocks in. So when i go to crank my t bars one of them is tired. One is cranked all the way and the other is cranked about half way to be even in the front. My rear fenders measure 39 in from the ground and about 37.75 in the front. Right now Im sitting like a NNBS HD. So im really only cranked about half way. I also stil have my front valance on and I want to keep it on with the body lift and when i run 315's.

 

[Z71LOVE]

With 3" bl and 2" blocks and about 1" of crank on 35s, saves the front end and has no issues with clearing

You must be registered for see images attach

This is exactly what i want my truck to look like with the BL, except i want to leave my valance on. Would i be able to run 315's with the valance? and are your tires 35 x 12.50 or 315's and what are your wheel specs in this pic?

 

[96k1500]

You would have to crank a little more than I am and may have to trim the ends of the valance and would have to pull your tow hooks off, wheels are 35x12.50 on 15x8 wheels and I believe 3.5-4 backspace

 

[dirtyhick42]

You would have to crank a little more than I am and may have to trim the ends of the valance and would have to pull your tow hooks off, wheels are 35x12.50 on 15x8 wheels and I believe 3.5-4 backspace

My 98 in this pic has a bodylift, valence that didn't rub except steep driveway turn ins(only hanging on passenger side from stump off road), 35s, and not much more if any more crank than you.

and just because I love ******* out my old trucks this is my old 98 with the specs in the sig.

You must be registered for see images attach

 

[Swims350]

valance s nothing, it's plastic and you can trim it easy.

As for me Danny, guy sold the tires so I aint gonna bother.

 

[Z71LOVE]

You would have to crank a little more than I am and may have to trim the ends of the valance and would have to pull your tow hooks off, wheels are 35x12.50 on 15x8 wheels and I believe 3.5-4 backspace

what exactly does pulling the tow hooks off do?

 

[Z71LOVE]

You must be registered for see images attach

This is what it looks like right now: 3" blocks T Bar crank and 285's on 17x7.5

 

[Z71LOVE]

You must be registered for see images attach

You must be registered for see images