SlimPickinz
Newbie
Hope this is the right spot, I have a 96 k2500 6.5TD, the 4x4 won’t “lock in” to 4hi, just blinks, I used to have to go from drive to neutral and back to get it to work but now it blinks, if I hit 4lo, the 4 hi light goes solid and the 4lo light blinks but the front tires spin even though it’s blinking. Just replaced the switch on the console. I had the actuator out and put power to it and the end came out about an inch but not fast but no exactly slow. Is it the actuator or encoder motor? I plow snow so i really need the help. Also got a upull encoder motor and actuator this time last year