Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
If the studs were installed, either you have six-lug hubs, or you have 8-lug hubs but you aren't buying for a GMT400.Well that’s the truth then! I guess RockAuto doesn’t know what they have. My NOS Timken came with studs installed.
Well that’s the truth then! I guess RockAuto doesn’t know what they have. My NOS Timken came with studs installed.
I re-checked RA listing. It kinda says both. Maybe where it says quantity-8.When I've looked them up on Rockauto they always say they don't.
I know Timken wheel hub assemblies use a red grease. I’d probably use that, then someone would tell me I f’d up.Doing this on my K2500 Suburban and wondering what y'all used to grease the wheel seal (CV shaft to the back of the hub seal)? I'm thinking the same Lucas Red-n-Tacky I'm doing the rest of the joints with. Definitely using the same grease on all the joints as Schurkey has posted about but haven't seen anything about what goes on this seal.
Thanks