Weiant2001
Newbie
Looking for Confirmation that I got my wiring plan set up correctly. My isolator came with a yellow wire that I am reading is for an override switch. (in the case your primary battery doesn't have enough juice to crank the motor, I can hit the switch and bring the second battery into play.)
I also want to make sure I have enough planned fuses and circuit breakers.
My Relay Fuse Distribution block is aftermarket for adding the accessories (lights/on board air/power inverter/etc...)
I also don't plan on running everything to the same ground. This was for the sake of the drawing.
I also want to make sure I have enough planned fuses and circuit breakers.
My Relay Fuse Distribution block is aftermarket for adding the accessories (lights/on board air/power inverter/etc...)
I also don't plan on running everything to the same ground. This was for the sake of the drawing.
You must be registered for see images attach