the big blue bus
I'm Awesome
so my t case as the yoke on the front and i got the flat flange from a 90 burb and shaft for my sas. when swaping over the flange it looks like it is not seating all the way on. they are both the short flanges. one thing i noticed was the yoke the last say 3/8" of splines are flat and the flat one is not. it appears that the flat flange is not going all the way on or maybe im wrong i dont remmeber how much it was before. i can also move the flange forward and back but the whole shaft moves, again could have been that way before.
will the flang i got work or do i have to come up with some otherr way to get 4wd.
this is what the stock one loks like. could that be why the older flange wont seat properly and is leaking fluid
will the flang i got work or do i have to come up with some otherr way to get 4wd.
this is what the stock one loks like. could that be why the older flange wont seat properly and is leaking fluid
You must be registered for see images
Last edited: