Sorry if this doesn’t belong here.
Okay, Duramax wheels circa 2000.
Painted black, with black center caps.
I want to run chrome/polished aluminum lugs.
Thoughts on keeps the center caps on without the threaded lugs?
Also open to other black center caps if they fit. 9.5 14 rear so I don’t really need the deep caps.
Right now, I’m considering 2 options:
1. Create a “washer” out of plastic that will mimic the spin on center cap pen center cap washers. Essentially, round piece of black plastic, cut to size of plastic securing lugs, put chrome lugs on, slide plastic washer in place and bond at proper depth.
2. Drill and tap 3-4 holes in the wheel to hole center cap on with small bolts/screws.
Here for other ideas or flaws in my current plans.
Thank y’all
Okay, Duramax wheels circa 2000.
Painted black, with black center caps.
I want to run chrome/polished aluminum lugs.
Thoughts on keeps the center caps on without the threaded lugs?
Also open to other black center caps if they fit. 9.5 14 rear so I don’t really need the deep caps.
Right now, I’m considering 2 options:
1. Create a “washer” out of plastic that will mimic the spin on center cap pen center cap washers. Essentially, round piece of black plastic, cut to size of plastic securing lugs, put chrome lugs on, slide plastic washer in place and bond at proper depth.
2. Drill and tap 3-4 holes in the wheel to hole center cap on with small bolts/screws.
Here for other ideas or flaws in my current plans.
Thank y’all