FLGS400
I'm Awesome
Got the fender lips rolled in the front, tonight. Was a lot easier than I thought it would be. Just used a couple hammers and a body work dolly and slowly worked my way back and forth, until I was happy with it and the area I needed to roll was pretty much flush with the inner structure of the fender. Saw this method in a post on here. Here is what the passenger side looks like now. Had to spray some paint on the inside edge to cover where the hammer took the paint off. I used masking tape over it, but I guess that wasn't enough.
Can't see the black when the wheel is on and on the ground. No (new) wavyness to the fenders either!
While I was waiting on paint to dry, I installed the interior, overhead LED lights and cover that I got on Amazon. Used Q-tips and window cleaner to clean the inside and outsides of the smaller lenses. Also cleaned up all the electrical contacts. Works pretty good!
Main light:
All 3 lights:
In case anyone is interested, here are the links:
www.amazon.com/dp/B0CDKVTH5N?psc=1&ref=ppx_yo2ov_dt_b_product_details
www.amazon.com/dp/B0CKL81PQQ?ref=ppx_yo2ov_dt_b_product_details&th=1
Can't see the black when the wheel is on and on the ground. No (new) wavyness to the fenders either!
You must be registered for see images attach
While I was waiting on paint to dry, I installed the interior, overhead LED lights and cover that I got on Amazon. Used Q-tips and window cleaner to clean the inside and outsides of the smaller lenses. Also cleaned up all the electrical contacts. Works pretty good!
Main light:
You must be registered for see images attach
All 3 lights:
You must be registered for see images attach
In case anyone is interested, here are the links:
www.amazon.com/dp/B0CDKVTH5N?psc=1&ref=ppx_yo2ov_dt_b_product_details
www.amazon.com/dp/B0CKL81PQQ?ref=ppx_yo2ov_dt_b_product_details&th=1