15x10's

[ajp89]

Hello,

I see a lot of 15x10 options on here, but I haven't seen this for the rear:

15x10
Backspacing: 4.5"
Offset: 0mm

Will these stick out pretty far?

Also for the front:
15x8
Backspacing: 4.5"
Offset: 0mm

I am planning on lowering the truck a little, nothing extreme.
Any issues with this setup?
TIA!

 

[Erik the Awful]

15x10 w/ 4.5" backspacing front and rear at the stock ride height. No issues. A mild drop might require some fender lip trimming, but I haven't gone that far.

You must be registered for see images attach

You must be registered for see images attach

 

[ajp89]

Thank you! I don't want my wheels tucked, so that looks like it might work well. That is one sweet ride you have there! Very solid compared to what's here in PA

 

[Erik the Awful]

Thanks, it's been a lot of work and there's still plenty more to do.

 

[ajp89]

Same, mines a project that I know will not be done anytime soon haha these are what's going on it:

You must be registered for see images attach

 

[someotherguy]

Sounds like you got your answer, if you're not going tucked then that should work. On the off chance someone is wondering about 10" wheels on a lowered gmt400 you want 6" backspacing.

Richard

 

[ajp89]

Sounds like you got your answer, if you're not going tucked then that should work. On the off chance someone is wondering about 10" wheels on a lowered gmt400 you want 6" backspacing.

Richard

Good info. I'm hoping to keep this truck very road friendly, but look great at the same time. I looked last night and noticed I have a good 6" between the rear axle and bump stop as well. I may be able to drop the rear of the truck about 4" and not even need to C-Notch!

 

[edgarvargas486]

Hello,

I see a lot of 15x10 options on here, but I haven't seen this for the rear:

15x10
Backspacing: 4.5"
Offset: 0mm

Will these stick out pretty far?

Also for the front:
15x8
Backspacing: 4.5"
Offset: 0mm

I am planning on lowering the truck a little, nothing extreme.
Any issues with this setup?
TIA!

You must be registered for see images attach

 

[edgarvargas486]

295/50/15
Rim is
15x10 -44 offset not rubbing at all

 

[PeacefulStorm]

15x10 295/50/15 tires, stock height. wanting to do a 3/4 belltech drop. What do you guys think?

You must be registered for see images attach