Search results

  1. wally

    Panel Alignment

    Pins would be my first step as long as the hinge it’s self are not wore out
  2. wally

    Procedure for minor surface rust?

    Just my 2 ct but you can also use white vinger to remove surface rust. I had some typical rust on the roof ,took a gallon of white vinger added a cup of salt mixed it together and laid paper towels over the rust spots and poured the mixture on and let it soak. A couple hours and then scub it off...
  3. wally

    A tailgate lock+cable replacement (92 CK truck)

    Man that's cool I was thinking the old plastic bezel with the lock in it from back in the day
  4. wally

    96 rear gate rebuild questions

    It's a cake walk. Rebuilt mine took about 15 minutes . I replaced the latch assembly at the ends of the gate
  5. wally

    ideas, please help

    I have to agree With the 95 sport mirrors . They look good and you can see ok out of them. I also like the cowl hood . Imo these trucks look better with it but I'm partial to them because I have one
  6. wally

    Tailgate adjustment

    I took my tailgate off to rebuild it and flip the handle inside the bed it's got 233 thousand on it and noticed the top is not as flush as I like"ocd" ,but it I does not rattle like it did either
  7. wally

    Tailgate adjustment

    Thanks for the input guys . It's pretty bad I own the service manuals and nowhere in them does it give an adjustment procedure for it . Thanks again
  8. wally

    Tailgate adjustment

    Is there a away to adjust the striker on either the tail gate or the bed?
  9. wally

    So.... I blew my muffler up

    Just my 2ct. But my truck 95 had a rough like yours went through 2 cats replaced ignition parts and o 2 sensor and a rich smell at idle from exhaust tried everything . Got to the point of rebuilding the throttle body and the o rings that the injectors sit in at the bottom had a flat spot in it...
  10. wally

    Recommendations on Seat Covers

    I used coveking neoprene seat covers as said above they take a while to get and there not cheap 230.00 but well worth the money
  11. wally

    Glass Lense Headlights

    And I purchased them not that long ago not even a year ago
  12. wally

    Glass Lense Headlights

    Ihad a set in the past once and that's exactly what happened picked up a rock chip cracked one of the lenses. I bought them at all GM nationals in Carlisle . They lasted quite a while for years Before it happened . I recently bought a set of glass chrome ones on auto-parts warehouse I believe...
  13. wally

    Tail light issues

    Could be the circuit boards at tail lights they are a pia
  14. wally

    Camper Mirror Replacement

    To be honest I don't have a clue. Sorry I can't help you there.
  15. wally

    Camper Mirror Replacement

    Best thing to do is break out the welder and fill the holes. IMHO that's what I would do to my pride and joy:)
  16. wally

    Junkyard Center Caps

    Got a set about 6 yrs back with new centers and lug caps and a set of half used tires for 300 bucks thought the price was good then .to this day still love those rims
  17. wally

    Mirror gaskets

    I've been searching the web everyone wants to sell the gasket with the mirror (f@)&) I've had little success just getting the gaskets and what's sucks worse is I am replacing my originals with calvu sports mirrors that don't come with them either
  18. wally

    doors rattle when hitting bumps in road.

    Replaced the bear claw latch and the pin it catches when I did my hinge pins and bushings on my doors that sit them up nice for me
  19. wally

    doors rattle when hitting bumps in road.

  20. wally

    Mirror gaskets

    I was hoping to get new ones. I'm preparing my truck for paint and found one of the gaskets leaking and left a nice surprise (rust) on the inside of the door where the mirror bolts are . I can't believe gm or anybody makes the proper body gasket
  21. wally

    Mirror gaskets

    Does anyone know where I can find new mirror gaskets without buying new mirrors? I can't seem to find them on the web.
  22. wally

    TBI 350 rough idle help

    Check the dampener door on the air cleaner assembly I had a similar deal with my 95 . The door was stuck close position so it was trying to pull all its air off the exhaust manifold
  23. wally

    350 TBI is all but done for, so....

    I've been debating this very same thing for a couple years now . There is no replacement for displacement but unfortunately where I live I have emissions test I have to meet and the state won't let me put a carb on mine so I'm doing the ls swap deal and I agree the best way to do it is good...
  24. wally

    Pulley problems

    Thanks for the help guys! I went to Harbor freight and picked up the set and I'm surprised how well this thing is made The one I got from an advanced auto is no way as nice as this one the nut you use to set the pulley was a cast pos not machined like this one. Again thanks for the help guys...
  25. wally

    Pulley problems

    I'll try the harbor freight one before I take it to the shop but the pulley is already half on and the tool that I bought isn't worth a crap it can't do either job at all . Lol the Harbor freight can't be any bigger of a p o s then this one! Lmfao . I'm more pissed off about the chuck of meat on...

Latest posts

Staff online

Members online

... and 12 more.
Total: 1,675 (members: 62, guests: 1,613)

Forum statistics

Threads
64,377
Messages
1,392,526
Members
51,519
Latest member
cford24688

Share this page

Top