Search results

  1. 1

    Stock pcm , trans controller

    Alright. Was just trying to see if I could swap to a carb and keep the tps, map and rpm input to make my 4l80e shift. Nobody seems to know
  2. 1

    Stock pcm , trans controller

    Did you complete this swap? I want to do the same thing.
  3. 1

    4l80e and a carb

    I'm looking to remove the tbi from my 93 k2500 suburban, but I want to keep my 4l80e. I've been told that I can install a hei and carb and travel the harness installed and the 4l80e will still function normally as long as I have a rpm signal, map and tps. Does anyone know if there is any truth...
  4. 1

    The Stupid Electronics Questions Thread

    Hey everyone I recently picked up an ex FBI 93 k2500 suburban. It had a bad motor so I replaced it. After everything was back together and running well, I started plugging everything back in that the previous owner unplugged. Everything works great except the 4wd. I can't figure out where two...
  5. 1

    What are these plugs for?

    Can anyone look on their truck to see where it goes for me?
  6. 1

    What are these plugs for?

    Hey everyone I recently picked up an ex FBI 93 k2500 suburban. It had a bad motor so I replaced it. After everything was back together and running well, I started plugging everything back in that the previous owner unplugged. Everything works great except the 4wd. I can't figure out where two...
  7. 1

    K1500 vs K3500 difference

    Have you ever test fitted a 37" tire? Also does your truck have a locker? My truck has a damn open rear end:thumbsdown:
  8. 1

    K1500 vs K3500 difference

    I have a 95 K3500 single wheel regular cab 4x4. I know it sits alot higher than a similar setup K1500 truck. How much higher does my truck actually sit? I have 285 tires and recently added a 3" body lift to it. The cv angles are dead flat on it so its never been cranked. I just bought 2" bls for...
  9. 1

    Fuel pump and oil pressure gauge wont work now.

    Hey guys. I am just finishing up the carb swap on my 95 454 k3500 5 speed truck. I got everything installed and jumped in the truck to see the oil pressure gauge is pegged past 80 psi. I turned the key on and the fuel pump isnt kicking on now either. I saw on another forum that there is a wire...
  10. 1

    Max tire size

    YOu got any pics of said truck with 37s? My truck will be better to drive than most due to the semi built 454 and 5 speed manual with 4.10 gears
  11. 1

    Carb 454 help

    I have a 95 k3500 5 speed srw 4x4 4.10 gear. I am in the process of swapping to a carb because im tired of the constant battle with my tbi. Im putting a 750 edelbrock carb, dual plane torker 2 and a hei in it. What wires do I need to hook into the HEI? I want to do a cam swap while im at...
  12. 1

    Max tire size

    yea, I have a set of stock 03 2500hd steel wheels on it now. What kind of back spacing do I need to keep the tires where they need to be and looking good?
  13. 1

    Max tire size

    I had messaged that fellow, but he never messaged me back. What kind of wheels do I need to be looking for tow run the hummer tires? Like what backspacing?
  14. 1

    Max tire size

    So just so I make sure im correct here, If I cranked 2" and used a 2: block I would be about 2" more than you are right? I know I should be able to crank 2" easy, my cv's are dead flat right now.
  15. 1

    Max tire size

    I was looking at H1 hummer 37" tires. Does anyone know if they actually measure out to 35.5" like i am seeing on the web?
  16. 1

    Max tire size

    Would mine rub as bad as a 1500 though? It sat much higher stock than a 1500 does. I feel like a 3" body lift and 2" suspension would be closer to 6 or 6.5" lift on a half ton correct me if im wrong. Also I am running a modified 454/5 speed over a 350/automatic so power helps alot with the...
  17. 1

    Max tire size

    YOur truck is actually the reason I waited around to find a 3500 around here. Sick rig man.
  18. 1

    Max tire size

    Here is a not so good picture after the body lift and doors and fenders and stuff. As you can see it is currently on a set of nbs steel wheels. I can get whatever wheels I need. As for power, that's no big deal. I removed the tbi setup and now it's a carb'd cammed 454
  19. 1

    Max tire size

    I I have a 95 k3500 rclb that I put a 3" body lift on and 285 tires. I want to crank the bars and block the rear for another 2" of lift. Will I be able for fit a set of 37" tires or will 35" be my max? The truck sat pretty high when stock compared to and 1/2 ton so I figured I may be able to...
  20. 1

    Midland 1001Z w/ Dual 4' Black Firestik Antennas, Springs, Mounts, & Split Coax Cable

    Bottom dollar shipped to 43760?
  21. 1

    anyone running a 3" body lift on 5 speed truck?

    WHats wrong with 2nd gear?
  22. 1

    New doors and now windows wont work.

    I just came in the house from being outside messing with the truck. If I install the switches from the denali doors instead of the factory ones from my truck, the windows do work. The Switch on the passenger door does nothing though, and if I push the passenger down from the driverside it just...
  23. 1

    New doors and now windows wont work.

    Hey everyone, I started to fix up my 95 GMC K3500 last week and I have run into a bit of an issue. My doors were rusty So my junk yard connection hooked my up with a set of doors off of a 2000 Denali, The doors are in perfect shape and were stored in a pole barn since the truck was removed. We...

Latest posts

Members online

Total: 1,312 (members: 38, guests: 1,274)

Forum statistics

Threads
64,688
Messages
1,398,828
Members
52,239
Latest member
Duster

Share this page

Top