Search results

  1. PrunetuckyMuddin

    NV4500 problems

    So I replaced the slave cylinder on my tranny and bled the system. The clutch still isn't disengaging and after driving it for a while, its getting worse. Any ideas what's wrong?
  2. PrunetuckyMuddin

    Clutch not disengaging

    So my clutch isn't disengaging all the way and I really need to fix it. When you press the clutch to the floor it's not disengaging all the way and it's makin it hard to shift and I'm sure it's bad for my tranny, I'm assuming it my clutch slave cylinder since it feels like the pressure plate...
  3. PrunetuckyMuddin

    Grinding noise when turning

    So, when I have my truck in 4hi or 4lo and I'm goin in a straight line, it works fine; but as soon as I turn here is a grinding/popping sound coming from the transfercase and the truck jerks a little. Is my transfer case shot? Also it's been leaking oil from the output shaft. I don't know much...
  4. PrunetuckyMuddin

    Need help!

    So I'm changing my calipers and I've got a stripped bolt that's seized up. It ps the bolt that connects the brake line to the caliper, how do I remove this? Thanks guys!
  5. PrunetuckyMuddin

    Rotor failed

    Well my brakes went out Sunday and I finally had time today to take my front wheels off to take a look. I took my right front off and the rotor had broke, there was no rotor at all. The driver side is warn out too. So I'm thinking that I need rotors, calipers, and pads. What else do I need? And...
  6. PrunetuckyMuddin

    Bad breaks

    So for the last month I've had a squekey sound comin from the right rear, i figured it was my breaks. So the other day my brakes started getting really bad and the parking brake light won't off now. I'm just wondering if the bad breaks are related to the parking brake light, is it supposed to be...
  7. PrunetuckyMuddin

    Budget sas

    My front end is shot and so I'm thinking bout doing a sas. I'm on a budget and was wondering what would be the cheapest I could do the swap and the least amount of lift. For the brackets I would be getting the ord sas kit, because it's my daily driver and I wouldn't have time to fab everything...
  8. PrunetuckyMuddin

    Chevy Militia

    Was wondering if anybody on here is a member of Chevy militia. I just joined and I haven't heard of any on this forum yet
  9. PrunetuckyMuddin

    Get together

    Was wondering if any of the guys on here get together to go wheeling, party or just to hang out and work on the trucks. I'm on the central coast of Cali and was just wondering if any one meets up
  10. PrunetuckyMuddin

    Leaf springs

    My rear springs are worn out and wasn't sure if I should get add a leafs or 3/4 ton springs. Ride quality doesn't bother me, I'm just looking at what's gona be better in the long run. Thanks guys
  11. PrunetuckyMuddin

    replacing door handle

    At the end of deer season about 5 months ago my driver side door handle broke off. and yester day i figured i have enough time to replace it, thinking it would take a couple hours, and so i did and it only took about 30 minutes. Tools i used: two flat head screwdrivers, a drill, a 3/16'' metal...
  12. PrunetuckyMuddin

    Need help

    Im new to subs and amps. I found a 12" crossfire sub and a 1200 watt soundstorm amp for $130, the sub is already in a box. I was wondering if this was a good deal, I'm just looking for something that gives me some bass and has a decent kick. Thanks for the help guys
  13. PrunetuckyMuddin

    Ball joints

    Well I went to the shop to get an alignment and they told me I need new ball joints on both sides, pitman arm, idler arm and I need new cv boots. The estimated $2200 for the work. I said screw that, I'll do it myself, so I'm ordering the parts I need for it and was wondering if I should use...
  14. PrunetuckyMuddin

    Won't engage

    So I already asked this question but I don't think I was the clear, when I go to put it in 4 lo, it makes a grinding noise like its trying to catch and when I let out the clutch and start to move it pops into neutral. It doesn't do it though when I go to put it in 4 hi though. I'm assuming it's...
  15. PrunetuckyMuddin

    Hub conversion

    Was wondering if anybody made a kit for our trucks so we could convert to manual hubs but keep the 6lug pattern
  16. PrunetuckyMuddin

    Poping noise

    This morning I was wheelin and I had to put in 4lo and when I did, there was a popping sound when I would let the clutch out and after about 30 seconds it would pop out of 4lo. Any body have any idea what's wrong?
  17. PrunetuckyMuddin

    cv angles

    was wondering if this is acceptable and how much more can i crank if its okay/
  18. PrunetuckyMuddin

    Tool box

    I have a white scsb with black wheels and bumper, I'm planning n getting a low profile tool box and was wondering which would look better: a regular diamond plate one, or a black diamond plate on. I'm leaning towards the black, but I wanted to hear your guys opinion. Thanks
  19. PrunetuckyMuddin

    New tires

    I'm gettin new tires and I can't decide between the cooper discover stt and the Goodyear wrangler mtr Kevlar. Price isn't a issue, they're gona cost me the same. Just wondering what your guys opinion was one these. Thanks
  20. PrunetuckyMuddin

    Sweet hoe

    http://sfbay.craigslist.org/eby/cto/3314587725.html reminded me of donyukon's tahoe
  21. PrunetuckyMuddin

    Cali roll call

    Anybody on here from Monterey county or near by counties?
  22. PrunetuckyMuddin

    White on black

    I have a white 95 rcsb and was wondering what it would look like withe black wheels and fake beads, black bumpers, black gmc emblem and black diamond plate rails. If anybody has a pic of a truck like this post it please! Thanks
  23. PrunetuckyMuddin

    Hose size

    Hi everybody, first time posting and was hoping you guys could awnser my question. I need to get a hose for my motor, goes from the evap to the throttle body, is it a 5/32 or a 7/32 diameter or am I completely off? My truck is a 1995 gmc withe the 350 in it. Thanks for the help guys.

Latest posts

Staff online

Members online

... and 20 more.
Total: 2,077 (members: 70, guests: 2,007)

Forum statistics

Threads
64,459
Messages
1,394,571
Members
51,720
Latest member
Crudygmc

Share this page

Top