Search results

  1. 9

    what happened to my transmission???

    1992 K1500 SAS 60/14 combo 4.88 gears 315/75/16 BFG MTs. 700r4. I drove my truck last week end, no wheeling, just running errands for which I needed a truck,(DD is a Honda civic 31 MPG). I put the truck in the garage. During the week I put a set of 52 inch springs up front and longer shackles...
  2. 9

    coil relocation on tbi trucks, anyone do it or have pics?

    Use an air cleaner with a flat base and it will clear. Or use a 1" spacer for the air cleaner and it will clear. With the air cleaner on you can't see it any way.
  3. 9

    Solid Axle Swaps

    I used A HP Dana60 (78-79 ford) and a 14bolt FF. I went with overkill on axles because I wanted an all round truck. I need to be able to drive it to the trails wheel it and drive it home. So Far so good
  4. 9

    solid axle front who has one?

    HPDana 60 limited slip, 14 boltFF detroit. 4.88 gears. 4" tuff cunty springs front, 4'shackle flip and 5 inch tuff country springs rear. SYE and drive line brake. High angle driveline front and rear drive shafts. YES the "little parts" here and there can add up quickly!
  5. 9

    Radio noise after ignition box install?

    Well, Yea I think so. I bought the Street Fire brand (The budget brand from MSD-$126.00+$20 for the gm harness). I bought to complement my other mods, Ultimate TBI mods, air intake mod, exhaust, MSD coil and adjustable fuel pressure reg. The truck does have better throttle response and Idles a...
  6. 9

    Radio noise after ignition box install?

    Thanks for the help guys I'll try this week end
  7. 9

    Radio noise after ignition box install?

    Can I shield the antena cable or do I have to move the box. Or is there some device I can put in the antena cable to help with noise?
  8. 9

    Radio noise after ignition box install?

    It is mounted on the firewall right next to the coolant over flow tank. Right where the AC accumulator would be if I had AC.
  9. 9

    Radio noise after ignition box install?

    I installed an MSD Street Fire CD ignition box in my 1992 K1500, (well now with dana 60 front and 14boltFF rear) with 5.7. Truck starts quicker, ideals a bit smoother, and has better throttle response, but now there is radio noise. it seems to vary from station to station, does not increase...
  10. 9

    Truck leans to driver side

    Yea cool man! have you ever been to carolina backwoods (near shallotte) check out there web sight.
  11. 9

    Truck leans to driver side

    I tried putting the steering wheel on the right. But I think the tank of gas weighs more than me!! Mudd duk where in Wilmington. I'm in wilmington NC. maybe we could wheel together sometime.
  12. 9

    Truck leans to driver side

    My truck leans to the driver side pretty good. I have had people ask me what is wrong with my truck, It's driving me crazy. I have 5 inch tough country springs in back. Is there any thing I can do with the springs to level it??? I took it to the frame shop and paid $90 to find out my frame...
  13. 9

    My truck

    Thanks guys. I'm still working on it, dialing everything in. But I'm pleased with the out come, can't wait ti get it in the dirt. As far as the paint I don't know yet??
  14. 9

    My truck

    Here are a couple of my junk. 1992 RCSB SAS. 4.88's 315/75/16 BFG MT's (for now). Front. HPDana 60, powerlock limited slip, 3' tough country springs(- overload), Zero rate. Sky offroad pan hard bar and Xover steering, rough country shocks(for now) Rear. 14bolt FF, Detroit...
  15. 9

    Driveline Brake

    Well damn! I knew I would like this site but too late. I paid the price for the HAD kit plus cost of a drive shaft. I still haven't figured out how to run the cable to it yet. I'd like to see how you run your cable.
  16. 9

    Transfer case clocking ring

    Hey Cajun, Here are a few more pics. I really think I'm going to have to clock down or lower the tcase. I'm taking the truck to my local park tomorrow, the have tractor tires buried halfway in the ground (I live on the coast and there are not many obstacles nearby). I can flex on those and check...
  17. 9

    Transfer case clocking ring

    Cajun, I noticed your truck is an extended cab, would that not place the t-case further back? I have a reg. cab short bed. Also I noticed you don't run a track bar. I could not drive my truck without one??????
  18. 9

    Transfer case clocking ring

    Here are a few pics, all are at ride height, pinion angle is about 1&1/2degree up, and drive shaft at 24 degrees I did do some grinding (not much). Once again, In order to get the truck to handle decently on the street I had to add the 4 degree shims to adjust caster. In all my reading and...
  19. 9

    Transfer case clocking ring

    Yes I can. I will post them tomorrow. Thanks
  20. 9

    Transfer case clocking ring

    Well!? maybe I'm looking at things wrong? I had the truck jacked up a couple of weeks ago by the pass. side frame. when I tried to turn the front shaft it was binding. Now I have jacked it up as high as my jack will go by the axle on either and it does not bind!? Mind you this is no flex...
  21. 9

    Transfer case clocking ring

    How Big?? Well I have about 7" in front and about 8" in the rear. 315/75/16 BFG MT's 1992 Chevy 1/2 ton (was) 60/14ff now
  22. 9

    Transfer case clocking ring

    I would love to Not have to do this, but with the shims for caster adjustment it leaves no room at the pinion for axle droop. I have an offset 1410 ujoint in there now to help but it vibrates pretty good at 20mph not that I would be driving in 4wd on the street, but was thinking about wheel...
  23. 9

    Transfer case clocking ring

    I'm new to this site and it looks like this might be the site I've been looking for. This is my first post. Any way i have a 1992 RCSB SAS, dana60 front 4.88's powerlock limited slip, 14bolt FF 4.88's Detroit rear SYE, transfer case parking brake, drive shafts front and rear from High Angle...

Latest posts

Members online

... and 43 more.
Total: 1,906 (members: 93, guests: 1,813)

Forum statistics

Threads
64,511
Messages
1,395,567
Members
51,864
Latest member
dbollenball

Share this page

Top