Search results

  1. itst9

    How to - Install -AN oil cooler lines

    Finally completed this upgrade. What a PITA if you do not remove the oil filter adapter. I was in a hurry and only removed the stock lines. Little did I think that by the time a wrench was put on the fittings this left about 8° to turn the wrench to tighten everything. Lastly the drive line for...
  2. itst9

    Uneve Pad Wear from Driver side to Passenger Side.

    If a caliper was stuck would I feel the truck pull to one side when braking? In this case pull to the right since the passenger side pads were more worn. This truck has mostly been doing city driving so on a normal day speeds really don't get over 45mph. But even at that speed and the occasional...
  3. itst9

    Uneve Pad Wear from Driver side to Passenger Side.

    Thanks! I will add more silicone to the sliders or just get new pins. The pins don't seem to have any flat spots. From the photos above I should have taken different photos. The photo on the left compares both pads that were on the caliper piston side. Photo on the right shows both pads that...
  4. itst9

    Uneve Pad Wear from Driver side to Passenger Side.

    Finally changed brake pads and rotors on my truck today and as i am looking through service records it appears they have never been changed. I bought the truck with 85K and it now has 150K. The problem I noticed was the break pads on the passenger side were much more worn than the driver side...
  5. itst9

    Anybody have any thoughts on this issue?

    Reading through this thread I have the same problem. However i believe it seems to be just the brakes, maybe the hydro boost? Or something in line with vacuum. The issue started as a small squealing noise that was intermittent and now is constant. Thinking it was a pulley i removed the...
  6. itst9

    Stainless Brake Lines

    Thank you all for the teflon advice. Brake lines were successfully replaced this weekend. To my knowledge no brake work was ever completed by the PO. The rear hard line and drivers side front had some marred threads which slowed the replacement down but were corrected. I was however quite...
  7. itst9

    Installing a Remote Start, Alarm, or Keyless Entry?

    As an update the remote starter unit has given me no trouble so far. Granted the remote start feature is only used in the winter. The door locks are also finally connected the only issue I have had is loose wiring in my door panel where I spliced in the door locks. After slamming the door the...
  8. itst9

    Stainless Brake Lines

    Doing some reading I finally purchased stainless brake lines from summit, front and rear along with a bleeding kit. Brake problems have never been present but I wanted to ensure it stays that way. Brake fluid has always been clear until this year. The ABS has never worked so I might dig into...
  9. itst9

    HIDs interfering with radio

    I have noticed this as well. Im running HID's in my hi beams with the 4Hi mod. It only occurs while the HID's are warming up with my RF Ipod adapter, the radio is fine if your listening to just the radio. There is also a wiring harness for the HID's so they are wired separately. Kinda intrigues...
  10. itst9

    Blower Vent Trouble

    Okay, thanks for the responses. I have located the actuators and all seems to be in working order. Now for the condenser freezing up I have read a lot of possible causes. 1. condenser is plugged 2. Low pressure switch not working 3. Over charged and cutting off to high pressure. Over charge...
  11. itst9

    Blower Vent Trouble

    After reading the posts I am having a similar problem with the vents blowing just a little on all fan speeds but the problem only occurs when i have my ac on full cold after a couple hours of driving. Its as if the system freezes up since I had my ac recharged, It never use to have this problem...
  12. itst9

    4l60e corvette servo

    Thanks. I'm relieved that part was not needed. Upon further inspection 91Bluestreak is correct and that is a 3/8" compression fitting.
  13. itst9

    4l60e corvette servo

    Random part question. I was able to finally get my corvette servo installed yesterday. Everything went just like a text book example removing and replacing the parts. The only problem I ran into was when i went to reinstall everything back into the transmission. As I crawled under my truck I...
  14. itst9

    dual inlet air cleaner???

    I found some pics on the link below that are close to what i needed to see. I also ordered the salad bowl from Summit today, they had free shipping! http://www.fullsizechevy.com/forum/image-gallery/snapshots-videos/466585-pics-my-intake-project.html
  15. itst9

    dual inlet air cleaner???

    Blue95 Do you have any pictures under your hood? Im curious to see what that salad bowl looks like from a top view. Thanks. By the way I like the stance of your truck.
  16. itst9

    4l60e corvette servo

    Saw this and was curious if this link is the correct shift servo. http://www.ebay.com/itm/CORVETTE-SERVO-PISTON-700R4-4L60-4L60E-E-CAMARO-TRANSGO-TRUCK-BLAZER-GMC-CHEVY-/200651990888?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item2eb7ca6768 I have also read on here that the bad thing...
  17. itst9

    Installing a Remote Start, Alarm, or Keyless Entry?

    Good idea a train horn would definitely create some entertainment for me at work or when people pass by my truck with no one inside. Ive been looking and see some other people on here have added horns. Maybe i will get one, they look a little on the pricy side though.
  18. itst9

    The Stupid Engine Questions Thread

    I have been reading around and can figure out what an "ultimate TBI mod" consists of. Can someone explain this to me. Thanks
  19. itst9

    Installing a Remote Start, Alarm, or Keyless Entry?

    Well I finally got my bulldog remote starter (RS1100) installed and so far so good. I was a little intimidated by all the wires dangling from the unit but after 5 minutes of reading I removed the ones i didn't need with a bobby pin to clean things up a bit, I used ~8 out of the 16 wires...
  20. itst9

    Installing a Remote Start, Alarm, or Keyless Entry?

    Did you uses a T harness? I see that the website for Bulldog recommends one for the install, it is not needed but saves some time and splicing. If so where did you find it because i have looked all over and i see harnesses for 94 and 96 but for the life of me cant find one for 95. What am i...
  21. itst9

    Anybody ever pulled the carpet out of their truck

    Never pulled the carpet out but I have taken a portable carpet cleaner to it. I took the seats and center console out. With the setup I had you just sprayed the carpet, just so it was damp not drenched, and then sucked the water up. Then let it dry completely for a couple f days. This worked...
  22. itst9

    My 95 to 99 (OBS) dash swap

    Looks like a decent bit of work. I was thinking about doing this to my 95 just for the newer looking dash, I have the lunch tray/cup holder style dash on the passenger side. How did you locate all of the screws that hold the dash on? Are they pretty easy to find, I am just asking because i took...
  23. itst9

    how to remove arm rests from buckets

    Does anyone know if this is the same for a 95? I have wondered about replacing my arm rest, the middle of it is caved in length ways. The fabric is still ok but I think it was heavily used by the previous owner.
  24. itst9

    Installing a Remote Start, Alarm, or Keyless Entry?

    Ok so I have been looking and have found one here from Bulldog Tell me what you guys think. I just want something simple with just buttons, maybe a few lights but nothing with an lcd screen. Is there a difference on the engine it is going on? TBI or Vortec. I don't there would be because it...
  25. itst9

    Installing a Remote Start, Alarm, or Keyless Entry?

    Does anyone have any recommendations for a good remote start/ key less entry for my 95. I have been looking but don't know too much about them and nothing has really caught my eye. Price can vary anywhere from 30.00 but I was hoping not to spend much more than 200. Wiring shouldnt be a problem...

Latest posts

Staff online

Members online

... and 17 more.
Total: 1,815 (members: 67, guests: 1,748)

Forum statistics

Threads
64,500
Messages
1,395,326
Members
51,835
Latest member
swat bourbon

Share this page

Top