Search results

  1. J Thomas

    Questions: Preparations for a rebuilt motor

    Two Questions, hopefully y'all can point me in the right direction. 1) I'm wanting to get my motor rebuilt in my '92. It's a TBI 350. Where can I find a list of sensors that I'll need to replace when having my motor rebuilt? 2) I'm wanting to swap my heads to a set of Chevrolet performance...
  2. J Thomas

    Vortec Heads, need help

    To be honest, I'm not out to make a beast of a motor. I'm unsure what's best because I stuck on what to do about whether to switch to carb or stay TBI. After researching and looking around, I believe my best bet will be to go with a new set of heads.
  3. J Thomas

    Vortec Heads, need help

    Question : What's a good aftermarket set of heads that are the equivalent or better than Vortec heads? Strictly DD/Towing purposes, thanks!
  4. J Thomas

    Vortec Heads, need help

    I found a used Edelbrock 3704 TBI intake, cheap. Any recommendations on a good set of heads that'll work better than stock and vortec?
  5. J Thomas

    Vortec Heads, need help

    Do you have any recommendations on a good set of heads for a DD that you feel are better than vortecs?
  6. J Thomas

    Vortec Heads, need help

    Is it better to buy new?
  7. J Thomas

    Vortec Heads, need help

    I'm trying to plan a rebuild for my 1992 K1500 with a 350. Im.not wanting to build a monster, just something with a bit more heart. So here is what I've come up with: Vortec Heads Summit Racing TBI intake to Vortec Heads Stock Exhaust manifolds I know I need to be looking towards a good cam...
  8. J Thomas

    4-inch Lift, Pic and Advice Request

    I did, thank you. I've decided to keep my truck stock and invest the money I had set aside for lift, labor and wheels/tires to go back to school on. I appreciate the help, I do, thank you.
  9. J Thomas

    NV4500 Question

    Please help. I have a 1992 K1500 with the NV4500 and I'm wanting to change the shifter knob. What thread size is the shifter knob? Google has not been of any help. Thank you.
  10. J Thomas

    Steering Shaft Replacement

    I believe I have found the answer to my question, but y'all double check me if possible. The 80-94 has the clamp that bolts to the gear box on the side of the u-joint. 95-00 has the clamp in-line with the u-joint. Does this sound correct?
  11. J Thomas

    Steering Shaft Replacement

    Hey guys, I have question because I'm lost on what to do. What year XJ Shaft will I need for a 92 K1500? Reason I ask is because it looks like 94 to 95, the XJ shaft changed. Do I need a pre-94 or post-95? Thanks!
  12. J Thomas

    Steering Shaft Replacement

    On the grinding, how far up the shaft and how deep do you go? What's the easiest way to do it?
  13. J Thomas

    Steering Shaft Replacement

    Awesome, thank you!!!
  14. J Thomas

    Steering Shaft Replacement

    I'm not sure if I'm in the right forum to ask this, but I'm needing help with a steering shaft question. I have a 1992 K1500 and I'm wanting to upgrade my steering shaft. Mainly because next to the power steering pump and gearbox, all my steering parts are brand new and my truck still has play...
  15. J Thomas

    T10 194 Bulb Question

    That's correct, yes. When I look on the web, most of all places recommend buying new twist locks and discharging the old ones.
  16. J Thomas

    T10 194 Bulb Question

    That's correct, yes. When I look on the web, most of all places recommend buying new twist locks and discharging the old ones.
  17. J Thomas

    T10 194 Bulb Question

    I have a 1992 K1500 and I'm wanting to change out the bulbs to LED. I have read the pin forums and I'm stuck at one point and need help. With my instrument cluster off, I can make access to the bulbs and their holders. Here is where I'm stuck. How do the bulbs come out? Every other vehicle...
  18. J Thomas

    Biggest Tire on Crank-to-Level

    I've tried to look on Craigslist for those wheels and I haven't had much luck. Mainly because idk how or what they'd be listed as
  19. J Thomas

    Biggest Tire on Crank-to-Level

    That looks really nice! Well almost, everything except that Alabama tag on the front, lol, just kidding. Did you like them while you had them? If you didn't go bigger, would you have kept them? How much did you sell them for?
  20. J Thomas

    Biggest Tire on Crank-to-Level

    Any help on finding a picture of an OBS with these style wheels in a 285, no lifted truck? Google and yahoo have been no help.
  21. J Thomas

    Biggest Tire on Crank-to-Level

    The more I think about it, the more I want to go to a 285. I was given a free to 285. It's got less than half life on it, so it would make a good spare. Plus it's about $30 cheaper a tire.
  22. J Thomas

    Biggest Tire on Crank-to-Level

    My truck is a 92, 3.73's and I was either going to go with the factory saw - blade style in 16's or move up to a NBS 17.
  23. J Thomas

    Biggest Tire on Crank-to-Level

    Hey everyone, I'm wanting to buy new BFG A/T tires at the start of next year. I have a 1992 K1500. With a level crank, what's the biggest Tire I can fit successfully and still look good? If I can fit a 285, can I go to a 295 and be fine? Please help before I make a costly mistake. Thank you.
  24. J Thomas

    4-inch Lift, Pic and Advice Request

    Hey, I'm wanting to lift my truck and run 315's. I'm not a fan of the way the 6 inch kits look, but I don't the 4 -inch kits. Does anyone have pictures of their truck with 315's or 35's on a 4-inch kit? Also, what are some things I need to prepare for and which brand do you feel offers the best...
  25. J Thomas

    C1500 parts for sale in Maryland

    Does it have oil cooler lines? If so, can you snap a pic and do you have a price?

Latest posts

Members online

Total: 1,407 (members: 46, guests: 1,361)

Forum statistics

Threads
64,449
Messages
1,394,258
Members
51,692
Latest member
manos52345

Share this page

Top