Search results

  1. Chevy1500

    What Kind of Rims do You Guys Have?

    @dave_erald As Curt posted, I got them right from the Treadwright website. Theyr'e great tires so far and I couldn't beat the price. I don't know about Canada, but I ordered directly from the site and they were shipped to my door FedEx. For 35x12.5s they balanced out impressively easily...
  2. Chevy1500

    HELP

    Did you confirm that you are actually getting spark? Its actually more common for the ignition control module (black box on the heat sink next to coil) to go out than the coil itself. If you don't have a spark tester, pull a plug and see if it sparks to the valve cover or other ground while...
  3. Chevy1500

    Lower Control Arm Bushing Install

    I ran into the same thing when I did bushings in my lowers. Ended up pressing them in with a bench vise, which was a huge pita but got it done. I also couldn't get them in for the life of me. Figured out the metal tube in the replacement bushings were just a hair longer than stock and the mating...
  4. Chevy1500

    Brake conversion?

    You can find cross drilled and slotted rotors pretty readily. Never used them, but they were easy to find: BAER #55026-020. Can find them on Amazon, Summit, Ebay, ect. Didn't find any dual piston calipers right off the bat, but I'm sure they're out there. Kyle
  5. Chevy1500

    not real sure where to post,Oil guage pegged out High side

    Sounds dumb, but try tapping on the gauge. Ever since I put in a high flow oil pump, my oil pressure at start up is regularly 80 and above and once in a while the gauge gets stuck above 80. A couple of taps on the gauge and it lets go and works as it should. Worth a shot. Kyle
  6. Chevy1500

    Horn issues

    If you have a multi-meter, see if you have power going to the fuse, the relay, and the horn. That will help you to trace to where your issue is. Could be the horn switch in the steering wheel or a broken wire/short somewhere along the way.
  7. Chevy1500

    Tail light issues after removing bed

    I just recently put my bed back on after repainting my truck and frame. I hooked everything back up and had the same exact issue until it dawned on me that I was trying to ground through frame paint. Once i was properly grounded to clean metal it was all back to normal. Rust will definitely...
  8. Chevy1500

    Sunroofs on 88-98 gm trucks

    My 96 has a sunroof. It is not factory though. My truck was a direct from factory Monroe Sport Truck conversion. They installed the sunroof and it has never once leaked. It is the manual tilt style. The biggest problem I have with it is that it will make replacing the headliner a good bit more...
  9. Chevy1500

    High idle issue 98 350

    If you have access to a decent scan tool, it will show the live information on both the TPS and the IAC. The GM Tech II definitely shows it and I think some of the more advanced consumer scan tools will too. Maybe even the loaners from your local auto store. I don't remember what the IAC should...
  10. Chevy1500

    High idle issue 98 350

    I had a throttle position sensor go bad on mine and it caused a pretty similar issue to what you are seeing. I tracked it down using a scan tool, it said I was at 60% throttle when I was really only at about 15%. Pulled it off and it was all corroded inside. 10 minutes later I had a new one on...
  11. Chevy1500

    Windshield removal

    I also recently replaced my windshield when I repainted my truck. I called a couple of local shops to get quotes and all, including Safelite told me that with the year (96) it was a 75% chance that they would break it pulling it out and they don't cover that. So I figured it would give it a...
  12. Chevy1500

    hello from chicagoland!

    Clean truck. Welcome from the SW suburbs.
  13. Chevy1500

    Knock sensor leaking best way to takle it?

    Whether you tighten it or install a new one, it has to be properly torqued. If not, you will get an engine code for it. Amazon has replacements pretty reasonably. I've never seen one break in there, but they do often get pretty corroded. Shoot it with some PB blaster a day ahead of time and it...
  14. Chevy1500

    Frame and under bed coating/ painting

    I just recently did my whole frame and underside of the bed as well. I used all Eastwood products and it turned out great. I wire wheeled the whole thing, did my repairs, and then coated the whole thing with the Eastwood rust converter. used two spray bottles to do the whole truck, but just the...
  15. Chevy1500

    Tips on welding in new rockers and cab corners??

    I used a ratchet strap and just hooked the stake pocket on each side. Then used the hoist to lift from the center of the strap. Make sure you use a heavy duty strap or even better a lifting chain if you've got one. Here's a picture that kinda shows what I'm talking about. I just pulled the...
  16. Chevy1500

    Mirror gaskets

    According to Gmpartsdirect the part numbers are 15697341 Left Mirror Seal 15697342 Right Mirror Seal Thats for the newer plastic mirrors as far as I can tell. It looks like you can pick one up on ebay for about $22. You can probably get one from your local dealer for less though. The Chevy...
  17. Chevy1500

    Tips on welding in new rockers and cab corners??

    If you have an engine hoist, use a strap and hook the pockets in the bed rails. When I pulled my bed to do cab corners, all it took was an engine hoist on the tailgate end and two guys on the other and we had the bed completely off in no time. The bed doesn't have to come all the way off to do...
  18. Chevy1500

    What Kind of Rims do You Guys Have?

    I'm running Dick Cepek Gun Metal 7s They're 17x9 0mm and I've got them wrapped in Treadwright 35x12.50r17s 20160108_141645 by Chevy1500 posted Jan 29, 2016 at 12:58 PM 20160108_142047 by Chevy1500 posted Jan 29, 2016 at 12:58 PM
  19. Chevy1500

    94 C2500 Part Out

    Too bad, mines starting to rust through and have been looking for a decent replacement.
  20. Chevy1500

    94 C2500 Part Out

    What kind of shape is the rear bumper in? Any rust or dents?
  21. Chevy1500

    Door Handle and Door Pin Replacement

    I just put two new doors on the truck and with them, new rollers, hinge pins, and bushings. I had a bear of a time getting the bushings in properly. Couldn't get enough leverage with large channel locks and hammering them ended up breaking two of them. So I made a little press out of a 2"...
  22. Chevy1500

    Tow Mirror help!!

    I made a plate out of some 3/16" steel that I bolted through the bottom two studs on the inside of the door. It gave it something a little more substantial than just the thin door skin to hold the mirrors. It probably cut the mirror vibration down in half. Still some at idle with my cam, but...
  23. Chevy1500

    Are these lights any good?

    They look similar to the ones I bought for my truck. Got mine from VIPMotoz on eBay. Quality is passable but they look pretty sharp on the truck. If you get them I would suggest sealing all of the edges of everything otherwise they might fog. Also, do everything you can to re-use the stock...
  24. Chevy1500

    Anyone ever seen these before?

    I have a very similar center console/jump seat in my truck. Mines looks like a newer version - my truck is a 96 so its the newer interior. My truck was built by Monroe Sport Trucks and that's likely where the upgraded interior came from. The seats are made by Flexsteel. They do seats for RVs...
  25. Chevy1500

    Rear fogs, but $&%F$! cargo lamp switch!!!! WTF?!

    I have a similar setup on my truck. Mine is a 36" bar mounted above my hitch (3"body lift). I am long past keeping things OEM so mine is switched through a Federal Signal 6 switch box. Mine is 180Watts which equates to only about 14 Amps. (Amps = Watts / Volts) And his are likely 18W...

Latest posts

Staff online

Members online

... and 29 more.
Total: 1,810 (members: 79, guests: 1,731)

Forum statistics

Threads
64,391
Messages
1,392,883
Members
51,561
Latest member
wcross

Share this page

Top