Project champagne (ecsb)

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

zachwild101

Newbie
Joined
Sep 18, 2016
Messages
25
Reaction score
22
Location
Tucson
it was lacking in the power department so i then did a few upgrade to the motor

started with the vmax intake spacer and the 8mini delphi injectors instead of the popit injectors

You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach








Sent from my iPhone using Tapatalk
 

zachwild101

Newbie
Joined
Sep 18, 2016
Messages
25
Reaction score
22
Location
Tucson
Here's a quick picture of the headers on and the msd 8.5mm spark plug wires

You must be registered for see images attach



Sent from my iPhone using Tapatalk
 

zachwild101

Newbie
Joined
Sep 18, 2016
Messages
25
Reaction score
22
Location
Tucson
I then score this ramjet 350 intake manifold off craigslist about an hour away from Tucson
It came with some spark plug wires to harnesses a standalone PCM a distributor and other miscellaneous little items springs pushrods that sort of thing
I have plans only to use the intake manifold and one of the harnesses to cut up and mate with my current harness


You must be registered for see images attach


You must be registered for see images attach



Sent from my iPhone using Tapatalk
 

zachwild101

Newbie
Joined
Sep 18, 2016
Messages
25
Reaction score
22
Location
Tucson
The plan was to pull the motor out freshen everything up bearings rings etc. then put everything back together and put the intake manifold on and do the custom wiring to make the ramjet intake work
So it was off to the machine shop to make sure everything was square block and head wise


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach





Sent from my iPhone using Tapatalk
 

zachwild101

Newbie
Joined
Sep 18, 2016
Messages
25
Reaction score
22
Location
Tucson
While it was at the machine shop I ended up changing my mind and ended up going the full way and not just a normal build
Went with some machine work, clearance for stroke, bored, decked, mild head work, chrome plated swirled polished stainless valves.
Me and my dad did the assembly
Bottom end built with eagle crank, scat rods and Wisco forged pistons, ramjet350 cam
383ci is what it ended up

You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach



Sent from my iPhone using Tapatalk
 

zachwild101

Newbie
Joined
Sep 18, 2016
Messages
25
Reaction score
22
Location
Tucson
Then came the fun part.... wiring
Wiring up all 8 injectors and extending a ton of wires
Also switched to a 5 wire maf
She is now up and running and properly tuned



You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach



Sent from my iPhone using Tapatalk
 

zachwild101

Newbie
Joined
Sep 18, 2016
Messages
25
Reaction score
22
Location
Tucson
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach


Installed a roll pan got it all welded on and then shot it really quick with something single stage black then single stage clear with some flake in it
Just for the time being till the truck gets painted


Sent from my iPhone using Tapatalk
 

zachwild101

Newbie
Joined
Sep 18, 2016
Messages
25
Reaction score
22
Location
Tucson
You must be registered for see images attach

Quick little side shot


Sent from my iPhone using Tapatalk
 

zachwild101

Newbie
Joined
Sep 18, 2016
Messages
25
Reaction score
22
Location
Tucson
You must be registered for see images attach


Installed some lunati 1.6 roller rockers


Sent from my iPhone using Tapatalk
 
Top