What up folks? New to this site but not new to the car/truck world. I figured I would go ahead and post up a couple pics of my burban. Let me start with a disclaimer.
I have owned this burb for a little over three months. It was bone stock when I bought it. The body kit/running boards will be removed at some point. The problem is, whoever installed them used 1.67 million self tapping metal screws. I do not have the means or patients to patch that many holes right now. Moving on.
For some reason I didn't take any pictures before I started working on it. Right now as it sits it has a 2.5" ebay coil spacer on the front along with the RC ball joint spacer. The rear has 1.5" blocks and I'm running 31X10.50-15 tires. Eventually I will get the RC 4" spindles bring up the back to match. Probably just going to run 33's at that point but maybe 35's. Just depends how it looks with the coil spacers still in. Or maybe out.
You must be registered for see images attach
I put the tires on before the lift and the front was actually tuckin' tire. The rear was about 1" gap.
You must be registered for see images attach
I found me a nice little concrete slab to see how much travel I could get out of the suspension. I was kinda impressed.
You must be registered for see images attach
You must be registered for see images attach
And here is a pic of me and Robert B. He is also 2WD.
You must be registered for see images attach
Thanks for looking. Have a great day.