Dually Hauler from Dallas

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

modernbeat

I'm Awesome
Joined
Aug 23, 2021
Messages
216
Reaction score
716
Location
Dallas, TX
Where is that module inside a Camaro? I have a 4th gen parts car to seal from, just need to know where to look.
It's under the dash, far left, almost against the left kick panel. There's a small panel that looks like a fuse box and the module is plugged into it. There's a clip on the right side that holds the module to the panel.
 

BNielsen

I'm Awesome
Joined
Sep 6, 2018
Messages
2,671
Reaction score
4,194
Location
North Carolina
I'd be interested if you could do a "How-To" on wiring up the speaker; I've got the camaro chimes in both of my trucks, much better than the buzzer but I'd love to do something different, are the speakers able to be programmed with different alarms?
 

modernbeat

I'm Awesome
Joined
Aug 23, 2021
Messages
216
Reaction score
716
Location
Dallas, TX
I'd be interested if you could do a "How-To" on wiring up the speaker; I've got the camaro chimes in both of my trucks, much better than the buzzer but I'd love to do something different, are the speakers able to be programmed with different alarms?
This video explains it. It's all over the place, so start watching where I've got it queued up at 3:30. He shows the four terminals to de-solder to remove the original speaker and which two terminals to solder in the programmable speaker. The other two terminals just hold the old speaker to the board. The speaker can be mounted like any USB flash drive and you can transfer whatever MP3 you have to it.

xc_hide_links_from_guests_guests_error_hide_media


Although this speaker can play more accurately, I'll probably load it with something from the 8-bit library.

Might be Immigrant Song first
xc_hide_links_from_guests_guests_error_hide_media


Or, get my Star Wars on with the Cantina Theme
xc_hide_links_from_guests_guests_error_hide_media
 

caw_86

Supporting Member
Supporting Member
Joined
May 31, 2022
Messages
586
Reaction score
838
Location
DFW, Texas
Still there to my knowledge. Also Dismantlers 2000. Those are a mile from the shop space I lease off Midway.
Dos amigos pull n save closed down, owner sold the business. Yard is closed until further notice as far as I know
This video explains it. It's all over the place, so start watching where I've got it queued up at 3:30. He shows the four terminals to de-solder to remove the original speaker and which two terminals to solder in the programmable speaker. The other two terminals just hold the old speaker to the board. The speaker can be mounted like any USB flash drive and you can transfer whatever MP3 you have to it.

xc_hide_links_from_guests_guests_error_hide_media


Although this speaker can play more accurately, I'll probably load it with something from the 8-bit library.

Might be Immigrant Song first
xc_hide_links_from_guests_guests_error_hide_media


Or, get my Star Wars on with the Cantina Theme
xc_hide_links_from_guests_guests_error_hide_media
i think the radio signal from contact would sound neat, not sure if it would translate to 8 bit wel
 

caw_86

Supporting Member
Supporting Member
Joined
May 31, 2022
Messages
586
Reaction score
838
Location
DFW, Texas
Heck yes!

NASA has an excellent collection of actual “space sounds” on their website.
I edited the cleanest clip i could find

 
Last edited:
Top