AK49BWL
GMT400 Forever!
No
Haven't tried, been busy on wiring.
Haven't tried, been busy on wiring.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I think sawzall the entire floorpan around the bolt, that oughta do it.No
Haven't tried, been busy on wiring.
Yes that's what I use, a Challenger 3/8 drive hex bit socket ( the bit is 3/8" as well). Same as on square body trucks.Special brake tool? Allen key? 9.5mm is 3/8th inch.
Yes that's what I use, a Challenger 3/8 drive hex bit socket ( the bit is 3/8" as well). Same as on square body trucks.
How DARE you! Going back to the original thread! Of all the nerve!Maybe a dumb question, but did he ever get the seatbelt bolt out, lol.
Sent from my iPhone using Tapatalk
They didn't figure anyone but a collision repair shop or their dealers would be needing to pull these bolts.
Yes, but if y'all weren't on the GM payroll, why should they care what hurdles they put in front of you?Interior guys, too.
I dont know , I had them and a thread file before I ever bought a set of taps. In auto repair there is far more thread correction than drilling and tapping new threads.How many people actually have those and not regular taps?
I dont know , I had them and a thread file before I ever bought a set of taps. In auto repair there is far more thread correction than drilling and tapping new threads.