kewljay223
OBS Enthusiast
- Joined
- Mar 31, 2011
- Messages
- 60
- Reaction score
- 7
hey everyone. Fairly simple question. Bought the truck lowered 4/6 and it came with helper bags. They have always slightly leaked since I got it but now they hardly pump up. After inspection, there are all sorts of cracks and some pinholes. Needless to say, they need to be replaced. With that said, I have no clue what brand they are as there are no markings of any kind that I can see. What do i purchase to replace these? What Brand? What size? Weight capacity? Are the threaded fittings standard sizes? If not, does that mean I have to rip these out and figure out thread sizes? I would prefer to remove and replace at the same time if possible.
What I do know is the gauges and pump are Hellwig so I assume the bags are too but again cannot tell. I could care less if it gets replaced with the same brand that is in there now. I just want them to fit and function.
BTW, I let the axel sag all the way and the bags in their fully extended position was about 10.5" from mount to mount.
What are my options here? Thanks!
What I do know is the gauges and pump are Hellwig so I assume the bags are too but again cannot tell. I could care less if it gets replaced with the same brand that is in there now. I just want them to fit and function.
BTW, I let the axel sag all the way and the bags in their fully extended position was about 10.5" from mount to mount.
What are my options here? Thanks!