I can stomp on those brakes 10 times and it won't do anything...
I figured as much, was just throwing out ideas. That sucks!
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I can stomp on those brakes 10 times and it won't do anything...
I figured as much, was just throwing out ideas. That sucks!
Drove it all around today... didn’t die. I think we have a fix here...
Automatic transmission, truck randomly dies, in gear, with brake applied, at very low speeds (coming to a stop), fuel pressure is maintained when it dies, idles and runs great, no vacuum leaks, does not die when in neutral or park and the brakes are applied.
Brake light switch!
I think it was the dirty carpet
I am really starting to lean toward the brake switch and the TC. Ever since I pulled the "brake" fuse mentioned back on like the 2nd post of this thread, it hasn't happened! I just took it for a spin and tried everything I could do to get it to stall and it didn't.
What I may do is throw the brake switch in and plug the fuse back in. Then, see if it happens.
There was a hidden code:
P0719 Torque Converter/Brake Switch B Circuit Low
Not sure if this was caused by pulling the fuse, but it didn't come back after I cleared the code (with the fuse still pulled). May have not given it enough time to come back...
Regardless, I have a good feeling about that brake switch. I am going to try it.