Search results

  1. ShadowRejects

    Rebuilt Motor Backfiring No Start

    Agree with the other replies. Sounds 100% timing related.
  2. ShadowRejects

    Is it possible to put a supercharger on a tbi 350

    super cool. Always love hearing stories of people making things work
  3. ShadowRejects

    14 bolt swap question

    I bought a 14 bolt 9.5 semi float from a 87 Suburban squarebody. Had to reweld the shock tabs and spring perches, so you're already one step closer than I am.Mine was 8 lug. Wish I would've kept it being I went 8 lug about 2 years later and had to run adapters, which I still have with zero...
  4. ShadowRejects

    no spark

    You have quite a series of factors that tie into the crankshaft position sensor, (CKP), Start with simple, check fuses under the hood. Then move to wires. Wouldn't surprise me if you got a bad ground, but also wouldn't surprise me if your ICM is faulty. I've bought a few duds in the 3-4 I've put...
  5. ShadowRejects

    TBI still missing, failed emissions, code 34...

    Coming from someone who had a faint miss at low idle at WOT, would not hurt to check your compression.
  6. ShadowRejects

    Only unlock door with key, power door locks working?

    Ill bet you your actuators are just weak. Mine was doing the same exact thing until a few weeks ago when I replace both lock actuators. Now they slide up and down fast enough to take a finger off if possible.
  7. ShadowRejects

    Upside down power window switch

    The protruding side should face up, while the recessed side should face down. The switch itself is offset-pronged meaning it can't just be taken out and flipped upside down and re-installed unless the P/O was half-idiot and somehow managed to turn the harness as well and completely reinstall it...
  8. ShadowRejects

    At my wits end.. Looking for any idea.

    sounds like similar issues as mine, when my ICM went poo-poo. It was maybe 3 months old. I had just replaced with a Borg Warner (IIRC) and it was good for a few months. It was like clockwork, suddenly started dying on the way to work at the same 4-way stop every single day, sometimes started...
  9. ShadowRejects

    New outside mirrors?

    I got mine on ebay, then again mine are the NBS style tow meers. Ebay tends to have the cheapest prices IMO. Somtimes amazon. I've never really got into the LMC truck stuff. Just seemed overpriced imo.
  10. ShadowRejects

    6" pro comp lift

    Yes all 88-98 lift kits are interchangeable as long as they are 1500's
  11. ShadowRejects

    Tristan's 1994 z71 build thread

    I appreciate the kind words my friend. Its been a long journey awaiting. Hopefully will have a driveshaft made soon and have her resprayed this year. Thanks again I was telling Scott that its cool still seeing you active on here! I'm going to find some time to come on here more often. Im out...
  12. ShadowRejects

    Tristan's 1994 z71 build thread

    Heres a crappy but simple collage I threw together. From start to now. Same driveway. Same truck, around 6 years apart. Crazy how time flies.
  13. ShadowRejects

    Tristan's 1994 z71 build thread

    Here was some pics of the swap I tackled within two days time
  14. ShadowRejects

    Tristan's 1994 z71 build thread

    Also got some cab bushings on the way to fix the cab lean. Ordered some for a single cab by mistake and had to send them back to summit
  15. ShadowRejects

    Tristan's 1994 z71 build thread

    A lil more
  16. ShadowRejects

    Tristan's 1994 z71 build thread

    Hey everyone. Long time no speak. Glad to see some people still keep up with this thread. Scott messaged me so I figured I'd update it. The truck has since had a dana 60 put under it. Drove from Dallas to Angelton Texas to pick it up. Its a 1986 Ford Dana 60 kinpin. I completely overhauled the...
  17. ShadowRejects

    Replace master reservoir without bleeding? Or just do the whole master?

    Lots of issues. I wont get into detail. But it's not worth the headache, and thats coming from someone with a lot of patience. Want my .02, run 37x15.50's or less.
  18. ShadowRejects

    Lifted my truck 3". Steering knuckle problem

    Crank down some. I actually have the RCX upper control arms, and the bushings are starting to tear already almost 2 years later. It doesnt help with my wheels and tires, but it will save you the headache and money now to just crank it down an inch or two.
  19. ShadowRejects

    The Stupid Lift Questions Thread

    Yes you will be fine. Both with and without the BL
  20. ShadowRejects

    Replace master reservoir without bleeding? Or just do the whole master?

    Its not that hard bleeding the system. A cheapy vacuum bleeder and 15 minutes and you could have it done. I wouldnt even bother unless youre going to bleed the whole system. The second you crack open the lines on the MC, air is induced.
  21. ShadowRejects

    rear drums arent coming off a 14 bolt semi float

    Deal with them almost on a daily basis. A dead blow to the center between the studs usually does the trick
  22. ShadowRejects

    K1500 4x4 to 4x2?????

    x2.. Its as simple as removing the front drive shaft and well-lah, 2wd. If you want a 2wd so bad, sell/trade it for a 2wd. Don't butcher a 4wd that somebody else would love to have. Just my .02
  23. ShadowRejects

    1995 C1500 Brake Issues

    Not sure about your truck, but The factory proportioning valve is part of the RWAL brakes (or rear ABS, same stuff) I wouldnt run two proportioning valves. I would run just that aftermarket one. Now that I actually read it, it sounds like your rears have a higher pressure than the fronts...
  24. ShadowRejects

    Need Wheel Dimension Help

    I had some 2001 Nissan Pathfinder wheels that I ran on my truck for over a year and with 35x12.5's they sat flush with my fender wells. Why not just google 16x8 wheels?
  25. ShadowRejects

    01 14 bolt SF axle length??

    I forgot the exact length. But they fit under our trucks fine, you just have to weld new spring perches and shock mounts on them

Latest posts

Members online

... and 14 more.
Total: 1,567 (members: 64, guests: 1,503)

Forum statistics

Threads
64,356
Messages
1,392,022
Members
51,478
Latest member
F0rdSlayer

Share this page

Top