someotherguy's latest activity
-
Another consideration is with the bigger discs you are getting a lot more grinding for a little more cost. As you can only use the small... -
someotherguy replied to the thread 4" grinder and finding wheels.Yeah, I'm not really about buying cheap tools, so that's not the concern. Just wondering if I should go ahead and get the 4.5" grinder...
-
You will never regret buying good tools. No matter how little you think you will use them, you will end up using them for everything and...
-
So I've been using this old Makita 4" grinder that I inherited along with some other stuff many years ago. It's worn but still runs...
-
someotherguy replied to the thread What about bed liners. Spray on or Rubber mat?.Sliding heavy stuff easily is all fun and games until it slides when you don't want it to. :) My '94 had a smashed bed header panel and...
-
someotherguy reacted to TechNova's post in the thread What about bed liners. Spray on or Rubber mat? with
Like.
I have rubber mat on the floor and bedliner on the sides. I can roll up the mat and slide boxes or pallets easier on the painted floor... -
someotherguy reacted to df2x4's post in the thread What about bed liners. Spray on or Rubber mat? with Like.
My red truck has had a removable rubber mat in the bed since it was new. It's kept the bed pretty nice, and hasn't caused any issues...
-
someotherguy replied to the thread Talk me into, or out of, it....What a friggin' mess. Had to pick up some more death wheels and get busy on the other side. Swapped out the 4x4 blocks for my big...
-
-
someotherguy reacted to Schurkey's post in the thread holley has street fire distributor on clearance this weekend with Like.
The plastic-bodied, OEM distributors are different. Small-blocks are "normal", the big-block distributor has a different gear at the...
-
someotherguy replied to the thread holley has street fire distributor on clearance this weekend.It does indeed say "small block" but only on this one line of "tech resources" - "The Street Fire Vortec small block distributor must be...
-
-
someotherguy reacted to Hipster's post in the thread Best way to go about replacing rear panel? with Like.
Was meaning more of a sheet metal pull, weld a tab on the quarter and pull the sheetmetetal back, the outer wheelhouse and the inner...
-
someotherguy replied to the thread Fat brake pipe(s).Would be interesting to know for sure! I can't think of a single '87 I ever owned or worked on; the newest square I ever had was an...
-
1/4" brake tubing from the rear brake hose forward to whatever fittings or valving routed fluid to the rear goes back DECADES, in...
-
someotherguy replied to the thread Best way to go about replacing rear panel?.Plenty of people can weld but bodywork is a different animal. That's a job for someone experienced in bodywork. I don't see much...
-
someotherguy replied to the thread Old tint removal..I've always used fresh razor blades and Windex. It turns the adhesive into runny snot you can simply wipe off. Really hardcore...
