Recent content by mudpie

  1. mudpie

    Base difference.... Another mirror thread

    I seem to recall reading somewhere a few different descriptions of the differences, but can't find anything that verifies what I'm recalling. I'm thinking it was a matter of one of the bolts not being in the same location, which I can fix with a drill bit, and that the base was shaped slightly...
  2. mudpie

    Trail Ridge power tow mirror question:

    I think you'd be fine. I can't imagine it being so fragile that adjusting it once (or twice, ot ten times) by hand would be an issue. If it was that fragile we'd have heard about a bunch of them being broken going through the automatic car wash
  3. mudpie

    Base difference.... Another mirror thread

    I want to put some towing mirrors on my '96. I've found somebody selling a pair, and he says they fit 2000 and later trucks but won't fit his '97. I know the bases are different (but similar) between the 800 trucks and the 400's, but the difference isn't obvious to me. I tried searching and...
  4. mudpie

    Fouling 2 plugs

    Got it put together and it ran marginally better, but still misfiring and fouling 3 & 5. Been screwing with it for a couple days and ultimately decided to go back to the last part I replaced, which was the cap & rotor. I got them from AutoZone, and got the Duralast Gold with the lifetime...
  5. mudpie

    Fouling 2 plugs

    I just got the guy at AutoZone to check it. I've been looking for a scan tool, but haven't got one yet. I'm not positive it's accurate, but I've had it for years and used it on other cars, mostly my Volvos when I need to find out if I blew another head gasket, and the numbers I've gotten in...
  6. mudpie

    Fouling 2 plugs

    I put a gauge on it to check the fuel pressure. When running, it's showing 50 psi, and when I shut it off it holds that pressure for at least a couple minutes. If I had an injector or a line that was leaking, that pressure would drop, right?
  7. mudpie

    Fouling 2 plugs

    I swapped 3 and 5 with 1 and 7 and it's misfiring as soon as I start it up. There's no time period where it runs ok, waiting for the plug to become fouled. I thought maybe I got a defective distributor cap, but I pulled each wire off and checked with a plug and they're firing.
  8. mudpie

    Fouling 2 plugs

    I've got a '96 C2500, 5.7, and it's misfiring. CEL is flashing, but the code is "Random Misfire". I pulled the plugs and #3 and #5 are fouled black. The rest look good. Gap is good. Did a compression test on that bank and I get 200, 195, 190, 195, so I'm ruling out head gasket. Plus, I'm...
  9. mudpie

    Brake booster - 96 vs 97

    I need a brake booster for my 96 (JB7 brakes). Cheapest one on Rock Auto is $80, and a week waiting, but my local wrecking yard has a 97 (also JB7) with what looks like a new booster that I can get today for $20. Interchanges that I'm looking at list the 94-96 as a different booster than...
  10. mudpie

    MAP issues (P0108)

    It's the hose that came with the new pump, installed maybe 3 weeks ago. It's all soft and spongy. I've got some fuel line I can replace it with, but is there a special hose for submersion?
  11. mudpie

    MAP issues (P0108)

    6 hours and a tow bill later and it seems the fuel pump has now blown a hole in the hose
  12. mudpie

    MAP issues (P0108)

    Yeah, the hose came off. The plastic clamps were still tight, but they're plastic clamps. Replaced them with metal. The lower metal bracket where the pump sits is bent slightly. I don't recall exactly what the issue was, but I spent maybe half an hour putting the pump in, taking it back out...
  13. mudpie

    MAP issues (P0108)

    More better
  14. mudpie

    MAP issues (P0108)

    Pretty sure I found the problem. See if you can spot it
  15. mudpie

    MAP issues (P0108)

    I'm generally pretty careful about fuel stuff. When I pulled the pump I blew all the dirt off the top, scrubbed it with a small brush, blew it off again, then took the pump out. Inside the tank was very clean. Just put a filter in it, just because they're only ten bucks, and cleaned all the...
See more

Latest posts

Members online

Total: 1,029 (members: 22, guests: 1,007)

Forum statistics

Threads
64,487
Messages
1,395,035
Members
51,791
Latest member
WrenchAndRatchet

Share this page

Top