Recent content by david lucka

  1. D

    4l60 in a 92?

    Alright so my next question is torque converters would a torque converter from a 93 or 94 4l60e fit in my 92 700r4 correctly?
  2. D

    4l60 in a 92?

    Here is the trans i want to put in it. It has the one connector on the passenger side and just the shift linkage on the right side. I also took a picture of the code on it. Would this work?
  3. D

    4l60 in a 92?

    Oh okay. I thought he was talking about the plug on the trans and that i didnt have one. This clears the air
  4. D

    4l60 in a 92?

    So what if i just didnt hook it up?
  5. D

    4l60 in a 92?

    So i have a 92 half ton and the trans completely ****** itself. I also have a trans but im not sure which trans it is. Its not a 4l60e but it does have an electrical connector on the left side. What trans is that? Ive done a lot of research and im getting different answer. Will it work?
  6. D

    Heater

    So i recently had to buy a new climate head unit for my 92 and i plug it in and it doesnt work. Checked all the fuses all are good. I got a test light and checked the wires in the comnector for the head unit and i have no power at all besides coming from the relays. And when i probed one of the...
  7. D

    Older engine in a 1992?

    Okay. Because the starter sounds horrible right now I've tried shimming it but that didn't help. Granted I don't really know how to shim a starter but I don't know. Just curious
  8. D

    Older engine in a 1992?

    Would i have to get a different starter to match the older flywheel?
  9. D

    Older engine in a 1992?

    Okay. Thanks.
  10. D

    Older engine in a 1992?

    So then could i use the 2 piece flywheel on my transmission or do i have to get a special flywheel?
  11. D

    Older engine in a 1992?

    I have a block thats from around 71 that im putting in. Could i use the flywheel from the 92?
  12. D

    Older engine in a 1992?

    Alright, sweet. Thanks!
  13. D

    Older engine in a 1992?

    So i bought this engine im not sure of the year but i know its the generation of block before my pickups, so its carbureted and has the manual fuel pump. Im putting the heads from my original motor on it so i can use my intake and TBI. But the pickup has a sensor that screws into the side of the...
  14. D

    LM7 swap in 92 1500

    Alright. What does the TV cable do? What do you recommend on tuning the PCM? And from my understanding i heard that you use the 5.3s harness and you have to change some pins and and it hooks right up? Or do i have to buy a special harness? Also would the flex plate from the 5.7 possibly work for...
  15. D

    LM7 swap in 92 1500

    I have an LM7 engine and the engine in my 92 recently spun a bearing and i want to put in the LM7 engine into it. I want to run the original 700r4 transmission. What all would i need to do and change? I know wiring and stuff needs to be changes, but what would i need to do to the wiring and what...
See more

Latest posts

Staff online

Members online

Total: 1,305 (members: 38, guests: 1,267)

Forum statistics

Threads
64,428
Messages
1,393,882
Members
51,643
Latest member
No4x4andNo350

Share this page

Top