Hey, just picked up a 1996 C1500 with 4.3L. Fuel pump is noisy, engine studders upon acceleration with low gas, and fuel gauge is off it seems. Ive replaced mine twice in my lifted NBS by dropping the tank, but will probably tilt the bed this time. I will inform driver to keep at least 1/4 gas in tank at all times.
Delphi or ac delco seems most recommended and is what ive used before. I didnt want to settle on a generic one and do this again soon. After researching online at various sites I had my eye on the delphi HP10001. though sites such as rockauto, and amazon state "with Code # VCD,VRY,VPN,VRZ". I checked my RPO codes and do not have any of those codes, if they are indeed RPO codes. Do you think this fuel pump assembly will work for my application, or is there another pump i should be looking at? Any other parts i should have on hand for this install? Thanks!
Delphi or ac delco seems most recommended and is what ive used before. I didnt want to settle on a generic one and do this again soon. After researching online at various sites I had my eye on the delphi HP10001. though sites such as rockauto, and amazon state "with Code # VCD,VRY,VPN,VRZ". I checked my RPO codes and do not have any of those codes, if they are indeed RPO codes. Do you think this fuel pump assembly will work for my application, or is there another pump i should be looking at? Any other parts i should have on hand for this install? Thanks!