CrustyJunker
Is STILL Here?
Okay, here goes. I just changed water pump gaskets on my '95, I used some old ROL gaskets I had laying around, applied a thin coat of RTV, and put it on. After about 30 miles, driver side completely blew out and made a good size mess. The second time, I brushed/cleaned the surfaces, bought a pair of Fel-Pro gaskets, used High-Tack on the pump side and installed the block side dry instead of using RTV, and it seems to be pushing coolant past one of the gaskets again. The pump is fairly new and the weep hole is dry. It also doesn't appear to be a head gasket either.
Has someone else ever had a problem similar, or have an idea of what I might be doing wrong?
Has someone else ever had a problem similar, or have an idea of what I might be doing wrong?