I had the kit on my 305 in 2004 and took it off on the last build,
when i put the 355 in...so now i put it back in...better
keep in mind when doing this with aluminum tanks, that aluminum and methenal don't mix well and a
insulater in the tank has to be used
so the pump got mount as close to and low as i could get it to the tank
the lines were installed and hidden as much as possible from sight
the the controller got mounted and vacuum was extended to it as well as wiring
the rest was prewired already to the truck, so all i had to do was run a wire into the cab
and connect it to the circut switch
when i put the 355 in...so now i put it back in...better
keep in mind when doing this with aluminum tanks, that aluminum and methenal don't mix well and a
insulater in the tank has to be used
so the pump got mount as close to and low as i could get it to the tank
You must be registered for see images attach
the lines were installed and hidden as much as possible from sight
You must be registered for see images attach
You must be registered for see images attach
the the controller got mounted and vacuum was extended to it as well as wiring
You must be registered for see images attach
You must be registered for see images attach
the rest was prewired already to the truck, so all i had to do was run a wire into the cab
and connect it to the circut switch