smurfcivic
I'm Awesome
U can also spin the tie rods so the nuts face down for more clearance.
Veeman's 97 build
- Thread starter Veeman
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Veeman
I'm Awesome
Good idea I'm planning on getting all new tie rods as well so ill that then.
Sent from my iPhone 5 using Tapatalk
Sent from my iPhone 5 using Tapatalk
Bearcat91
CRASH
- Joined
- Jul 7, 2012
- Messages
- 11,247
- Reaction score
- 100
Looks awesome man!
blue_92_sierra
Aftermath
Looks good! You can pie cut your frame or "de-hump" your lower control arms as well
Veeman
I'm Awesome
Got my drivers side pocket all done.
Man I love my plasma cutter spring pocket cut in one piece.
Had to weld up the seam.
Also got my valves and the rest of my fittings today
Sent from my iPhone 5 using Tapatalk
Man I love my plasma cutter spring pocket cut in one piece.
You must be registered for see images attach
You must be registered for see images attach
Had to weld up the seam.
You must be registered for see images attach
Also got my valves and the rest of my fittings today
You must be registered for see images attach
Sent from my iPhone 5 using Tapatalk
Veeman
I'm Awesome
Well I thought I had all the fittings I needed turns out the way I want to run my lines and water traps require extra copper lol so I had to order another $100 bucks in fittings today.
Sent from my iPhone 5 using Tapatalk
Sent from my iPhone 5 using Tapatalk
98nightmare
Bill
Fk yeah! lol... Im layed the hell out on 22s with factory arms... just did a pie cut and MOOG upper ball joints for a k1500
98nightmare
Bill
You should be correct on not having to d anything to the arms or frame with 15s, if your running about a 65 or less profile tire.. Anything more the frame and arm will contact before laying out. My 15s w/65 tire layed out ok. but 18s w/45 i had to either dehump or pie cut. 1/2" pie cut will clear arms up to a 20" rim and a 3/4" will clear 22s and possibly 24s w/35s
Just my opinion, but i would either pie cut or dehump the arms just to be on the safe side.. Even if it dont hit layed out on 15s, nowhere is perfectly level and the possibility of stressing the weight from the frame to the arm would be my concern... Very possible that it cant hurt anything, and idunno if anyone else is leery about that kinda stuff.. but i am...lol
Just my opinion, but i would either pie cut or dehump the arms just to be on the safe side.. Even if it dont hit layed out on 15s, nowhere is perfectly level and the possibility of stressing the weight from the frame to the arm would be my concern... Very possible that it cant hurt anything, and idunno if anyone else is leery about that kinda stuff.. but i am...lol
Veeman
I'm Awesome
That's a good point I think ill do a pie cut on the frame and leave the lowers alone. 3/4" is nothing.
Sent from my iPhone 5 using Tapatalk
Sent from my iPhone 5 using Tapatalk
Veeman
I'm Awesome
Got both sides of my frame pie cut. I ended up taking about an 1-1/4" out.
Drivers side.
Passengers side.
Sent from my iPhone 5 using Tapatalk
Drivers side.
You must be registered for see images attach
You must be registered for see images attach
Passengers side.
You must be registered for see images attach
Sent from my iPhone 5 using Tapatalk
Similar threads
