Veeman's 97 build

[Veeman]

K well once I get mine installed ill let you know how it is!


Sent from my iPhone 5 using Tapatalk

 

[Veeman]

Ok today I removed my upper and lower control arms,and the question I have is when I go to put them back on how do I know the cams are in the right position? I couldn't mark them before I took them off because its a tight fit to get even a wrench in there. Anyone got any advise as to the easiest way to get them back in the stock position?


Sent from my iPhone 5 using Tapatalk

 

[Veeman]

Another question will I have to do any mods to my upper and lower control arms if I'm running the stock 15" rims?


Sent from my iPhone 5 using Tapatalk

 

[bow61509]

Another question will I have to do any mods to my upper and lower control arms if I'm running the stock 15" rims?


Sent from my iPhone 5 using Tapatalk

are you going to run stock spindles or drop spindles?

sent from the c1500 Denali

 

[Veeman]

I have 2"drop spindles


Sent from my iPhone 5 using Tapatalk

 

[bow61509]

I have 2"drop spindles


Sent from my iPhone 5 using Tapatalk

your going to need to trim the rain gutters on the lcas to run 15s

sent from the c1500 Denali

 

[Veeman]

Ok but I won't have to dehump the lca's?


Sent from my iPhone 5 using Tapatalk

 

[bow61509]

Ok but I won't have to dehump the lca's?


Sent from my iPhone 5 using Tapatalk

I'm just going with my personal experience... which I have none with bagging. I believe I read somewhere that you will have to but I think it just depends on how low you wanna go. I just know for a fact those rain gutters will have to be trimmed back to run the spindles with a fifteen. you might pm devs93 for any other questions
or just wait for a bagged member to chime in. sorry I can't give you a direct answer


sent from the c1500 Denali

 

[smurfcivic]

This is how much u need to trim off. Don't use a torch.

You must be registered for see images attach

 

[Veeman]

Ok perfect that won't be a problem for my plasma cutter.


Sent from my iPhone 5 using Tapatalk