Upper Control Arm Bushings

[1995z71]

I am in the process of rebuilding my front end, the U.C.A. bushings are done and need to be replaced. Should I go with this Moog upper control arm with bushings and balljoint
https://www.summitracing.com/parts/mog-rk620720/overview/year/1995/make/chevrolet/model/k1500

or...

Keep the stock ones with the already replaced balljoint and put in some quality bushings. Maybe energy suspension
https://www.summitracing.com/parts/ens-3-3134g/overview/year/1995/make/chevrolet/model/k1500

 

[Ckeene]

That's right put a link straight to summit racing!! Now I have to spend 2 hrs looking around on there.
Me personally would go with the moog assembly, it's all new and would last you another 100k. Quick and simple r/r also. Probably could sell old stuff to get some folding money.

 

[Justin S]

I just replaced all of my front bushings with Energy Suspension parts . It wasn't too hard to do, worst part was removing the old sleeves and bushings without removing the outer shell. I used a torch to burn them out. Once that was done, cleaned the shell out, and the new bushings slid right in. Its definitely cheaper than a whole new arm with bushings. Cheaper yet, if you are able, you can just buy new rubber bushings with the shell and sleeve and press them in. They only cost like $30 for all 4 on ebay for ACDelco ones.