My 1994 Yukon had it's original 4l60e transmission rebuilt roughly 2 years ago with high stall convertor and a shift kit. Currently has 15k on the rebuild. I'm unaware of the specifics as it was redone by the previous owner. All I have is the shop ticket which is unfortunately unspecific.
I've found that when rolling to a stop, I'll often get a little "clunk" as the truck shifts down from 2nd into 1st. Not everytime, but sometimes, especially if I'm coming to a sudden stop.
I don't get noise when shifting up.
The 12 bolt rear end is original and has a tiny bit of play, as is normal for the age. Just had the fluid replaced and was resealed. Not abused, just used. All u-joints are new and I just greased them ~1 month ago.
Is this normal for a transmission equipped with a shift kit?
I've found that when rolling to a stop, I'll often get a little "clunk" as the truck shifts down from 2nd into 1st. Not everytime, but sometimes, especially if I'm coming to a sudden stop.
I don't get noise when shifting up.
The 12 bolt rear end is original and has a tiny bit of play, as is normal for the age. Just had the fluid replaced and was resealed. Not abused, just used. All u-joints are new and I just greased them ~1 month ago.
Is this normal for a transmission equipped with a shift kit?