thought i would share. what have you guys done?

[dkh_524]

haven't seen any threads with just peoples systems so i thought i would share mine and would like to see what other people have done to there's. if there is any suggestions as to what i should do let me know

i have a kenwood deck with two 10" rockford p2's i put 6.5 components in the front and put 5.25 in the rear doors and unplugged the 4x6 that are in the back, i have r 500 for the subs and a r 300 -4 for the speakers. i mounted the usb port under the 12v plugs to give it some what of a clean look. im running all rockford wire as well. custom ported box

 

[Cablguy184]

Very nice System Sir ... Wish I could get a demo ...

My system build in in my truck thread ... The link is on my signature ...

 

[TruckinAin4Sissies]

Infinity Reference Components in the doors.

Phoenix Gold 75W RMS 2 Channel amp

P.O.S. Panasonic deck

(not installed) PG Mono-block sub amp

You must be registered for see images

http://www.youtube.com/watch?v=WFc1aY_4eOk&sns=em


-Truckin-

 

[gmcyukondriver]

Something I would recommend is to cut a hole in the rear door speaker grilles just big enough for the tweeter on those componenets. that's what I did with my polks, and it looks a lot better than not having the grille on there. I'll take a picture later so you can get an idea of how it looks.

Here's the head unit.

You must be registered for see images attach

And the sub, a pioneer 8" shallow mount. Build thread is here => http://www.gmt400.com/forum/showthread.php?5185-Just-picked-up-a-sub

You must be registered for see images attach

In the doors I have Polk db651's all around. I also have a JBL P80.4 running the door speakers wired in series so they only use 2 channels. The sub is running off the rear output bridged. In the very back, I have some Kenwood KFC-415c to replace the stock 4x10's. It sounds pretty good in my truck, not going to win any shows, but definitely better than stock.

 

[Rewind]

Right now I'm just running a Pioneer head unit with stock speakers. Not sure what I'm going to do next.

You must be registered for see images attach

 

[Cablguy184]

Right now I'm just running a Pioneer head unit with stock speakers. Not sure what I'm going to do next.

If you're interested, I would be glad to help you out with this when ever you are ready ...

 

[Cablguy184]

And the sub, a pioneer 8" shallow mount. Build thread is here => http://www.gmt400.com/forum/showthread.php?5185-Just-picked-up-a-sub

Please tell me you have this mounted under the seats or in the rear section of the truck bolted down ...

 

[Cablguy184]

Please tell me you have this mounted under the seats or in the rear section of the truck bolted down ...

My apologies ... You do have it under your seats ... Very nice work too ...
I've seen them in the back most of the times, but not under the seats ... How do you like it ??

 

[Rewind]

If you're interested, I would be glad to help you out with this when ever you are ready ...

PM sent

 

[T DOG]

haven't seen any threads with just peoples systems so i thought i would share mine and would like to see what other people have done to there's. if there is any suggestions as to what i should do let me know

i have a kenwood deck with two 10" rockford p2's i put 6.5 components in the front and put 5.25 in the rear doors and unplugged the 4x6 that are in the back, i have r 500 for the subs and a r 300 -4 for the speakers. i mounted the usb port under the 12v plugs to give it some what of a clean look. im running all rockford wire as well. custom ported box

Nice system.