The Body Lift Thread

[DISTURBINGTHEPEACE]

Anyone with unique homemade gap guards trying to think here?

 

[FastOrange]

Anyone with unique homemade gap guards trying to think here?

I'm going to use conveyor belting

 

[thz71]

Anyone with unique homemade gap guards trying to think here?

Semi mud.flap

sent from my Big Block powered phone

 

[SCOTTYINWV]

This is a great thread, convinced me to get a bl

Time to save some $$$...

 

[96k1500]

I had rubber bed mat on the 96

 

[Swims350]

This is a great thread, convinced me to get a bl

Time to save some $$$...

I hope you know somewhere to get a modified inspection sticker. Here in logan it's kinda hard to find someone who does them and ANY lift requires one.

 

[94Sierra4x4]

http://www.summitracing.com/parts/p...r/1997/make/chevrolet/model/k1500?prefilter=1

2" Performance Accessories BL -

Footnotes: 1 - Front bumper brackets are included in this kit.
15 - Steering extension included.
17 - 3" kit includes front and rear bumper brackets.
25 - Rear bumper brackets are available and sold separately for this application.

27 - Front bumper can be raised using stock bumper brackets.
Ehhh?! Stock brackets can be used to raise front bumper?

Another questions.. Can you flip the rear bumper brackets to compensate for the 2" lift? Or does that bring it up 3"?

 

[FastOrange]

http://www.summitracing.com/parts/p...r/1997/make/chevrolet/model/k1500?prefilter=1

2" Performance Accessories BL -

Footnotes: 1 - Front bumper brackets are included in this kit.
15 - Steering extension included.
17 - 3" kit includes front and rear bumper brackets.
25 - Rear bumper brackets are available and sold separately for this application.

27 - Front bumper can be raised using stock bumper brackets.
Ehhh?! Stock brackets can be used to raise front bumper?

Another questions.. Can you flip the rear bumper brackets to compensate for the 2" lift? Or does that bring it up 3"?

I used my stock brackets, but I had to cut them in half and weld the bottom of the bumper side to the top of the frame side!

You must be registered for see images attach

 

[94Sierra4x4]

I used my stock brackets, but I had to cut them in half and weld the bottom of the bumper side to the top of the frame side!

You must be registered for see images attach

Aaah, gotcha, thanks Josh.
Think I'll pull the trigger on this 2"...
Any idea about the rear bumper bracket flip? Will it work for 2" or just the 3"

 

[FastOrange]

Aaah, gotcha, thanks Josh.
Think I'll pull the trigger on this 2"...
Any idea about the rear bumper bracket flip? Will it work for 2" or just the 3"

I just realized u want a 2"! I have a 3"

Stock rear brackets could probs be made to work, but would take alot of fabbing!