Tech: Every possible dash switch for GMT400 trucks

[AK49BWL]

They're pretty easy to take apart and replace the bulb in, I dropped an LED into mine. Most all 95+ switches are lighted.

 

[SUBURBAN5]

They're pretty easy to take apart and replace the bulb in, I dropped an LED into mine. Most all 95+ switches are lighted.

Soldering tiny bulbs is a challenge for me. Never done it lol

 

[Caman96]

Anyone know how to remove just the knob on 96 headlight switch?

 

[kennythewelder]

Anyone know how to remove just the knob on 96 headlight switch?

I tried at the junk yard. Broke 3 of them. The tang broke off on all three. Left me with a broken tang inside of the knob. I never did figure out a way to get that out without braking them. I ended up, pulling the rubber off of my OE, and painting the plastic under neath gray.it look good like that, but I know you can get a new one from e-bay.

 

[mars2878]

Anyone know how to remove just the knob on 96 headlight switch?

I used a pair of pliers & just pulled mine off. I didn't care about damaging the face of the knob as I'm prepping for an Express knob swap.

 

[J_T_Beal]

For general consideration - The switch configurations should be thoroughly researched. You can spend a lot buying the theorhetically correct item. 88GMTruck is right about the dimensions on the aux light switch but I think that would remove the cargo lamp switch. Completely annoying that they did not make these standard. 88GMC truck, I am still not sure where you the aux light goes. BTW. Aux light is not the same as Aux Lamps. They seem to be a different form factor. I have one but have never been able to figure out where it goes on a 97.

You must be registered for see images attach

 

[J_T_Beal]

Follow up on the post - I found one of the very rare 3 open vertical stack retainers. I dont think I need it. Holler out if you might. 88GMCTruck. Did you use the Aux Light Switch?

 

[88GMCtruck]

Follow up on the post - I found one of the very rare 3 open vertical stack retainers. I dont think I need it. Holler out if you might. 88GMCTruck. Did you use the Aux Light Switch?

The switch you posted is from a gmt800, which is why it's a round button and doesn't fit the same.

 

[J_T_Beal]

Thanks dude! Anyone need it?

 

[modernbeat]

Has anyone found a pigtail crossover for the horizontal fog switch?
The PT2266 number brings up some Weatherpack connectors and nothing that looks right.