Tbi to carb swap

[eric.s.t]

I'm switching my 1990 tbi 350 to 383 carb..

I'm looking for a write up any one that would know what exactly I need to do to keep all my gauges and stock fuel sending unit. Going to be the first time doing it..

Sent from my SM-G900W8 using Tapatalk

 

[JScott23]

Gauges will work. Hell i'm running diesel gauges with a carb 350 lol I'm also using an in tank TBI fuel pump... it should run off the OPS, wont be effected by removing TBI.

 

[eric.s.t]

Anyone have a link to those inline regulators to keep the stock fuel pump?

Sent from my SM-G900W8 using Tapatalk

 

[Waylon Foote]

Anyone have a link tthat'swhat your after. se inline regulators to keep the stock fuel pump?

Sent from my SM-G900W8 using Tapatalk

I think summit racing has the bypass type regulators for cheap if thats
ost: 894003, member: 3328"]Anyone have a link to those inline regulators to keep the stock fuel pump?

Sent from my SM-G900W8 using Tapatalk[/QUOTE]
Not sure if what i

 

[D_EATON]

Anyone have a link to those inline regulators to keep the stock fuel pump?

Sent from my SM-G900W8 using Tapatalk

I am running this regulator in my driver side frame rail and have a return line going back to tank. Pressure is regulated down to 6 psi for carb and I am still running stock in tank fuel pump.

You must be registered for see images attach

 

[Dylan1991_1500]

Are there any changes needed to the electronic ignition for a carb swap?