Stock 1995 Z71 Specs

[95C1500]

Anyone know the
- fender height measurments
- rear end
- shocks
- etc...

Thanks guys...

 

[tylers88]

-Shocks are the blue and yellow Bilstien 4600
-Rear end could be either a 10 bolt or some had 14 bolt semi floaters, most if not all had G80 limited slips, seems like most had 3.73:1 gears
-If I recall fenders are around 32" front and 34" rear

 

[95C1500]

Thanks. That's what I was looking for. What about things others wouldn't have such as skid plates etc...

 

[5spd Z71]

Mines for a stock 10 bolt with 3.42 gears. But I suppose it depends on how it was optioned/ordered.

 

[tylers88]

Should be the front plastic "skid plate" thats more of a spash gaurd than anything, one under the diff and one under the tcase IIRC
I wasnt sure about the gears, just seems like most had 3.73s

 

[5spd Z71]

The skid plates on the truck are 1/4" aluminum, but would still be easy to bend/break. The 99+ got the plastic skid plates.

 

[tylers88]

The skid plates on the truck are 1/4" aluminum, but would still be easy to bend/break. The 99+ got the plastic skid plates.

I was refering to the front skid plate that is directly behind the bumper. I know those are just thick plastic, mine on my 88 was(GMC), my parents 99 OBS Burb(Chevy), 2 of my buddies 97 Z71s had plastic(3 between the 2 of them, 2 Chevy and 1 GMC). My 04 nonZ71 crew cab has 1/4" aluminum front diff skid plate and a heavy stamped steel one under the tcase, also just so you know mine have taken some hits and survived.

 

[5spd Z71]

Thats weird cause mine is aluminum, and the one on my dads 99 is plastic.

 

[dirtridinz71]

Both of the 92 z71's I have had, had the aluminum front skid plate. Now my 98 z71 it is plastic.

 

[Vortec Lover]

plastic on mine, but I intend to make one out of steel