I wanted to make my exhaust tips removable. The leaf spring hits the exhaust where it exits out the side when the truck is a lift. So I thought I pair of v band clamps would solve the issue. been a couple months since I had the v bands installed and recently need to put the truck on a lift. Ran into some problems. One of the clamps is welded onto the flange. Also the exhaust pipe sticks out of the flange. Plus they only put one hanger on the whole exhaust, right at the tips. So if I remove the tips the whole exhaust hangs on the manifolds untill the muffler hits the trans crossmember. Supposed to be a good exhaust shop that’s been a round for 20 years. The more I look at the exhaust I just see lazy work and bubblegum welds.
You must be registered for see images attach
You must be registered for see images attach