Replacing ignition coil

[Laid GP]

95 TBI 350. Truck has no spark, already replaced distributor cap, ignition module and rotor so next step was to replace the coil. Maybe it's because I was doing this at night but I can't figure out how to get the coil off? It looks like it has tiny screws on the bottom corners of the unit but I tried a 5mm socket (smallest I had) and it wouldn't budge. I'm sure I'm doing something wrong... HELP ME INTERNET PEOPLE

 

[90W7]

It has a 2 piece bracket. And The coil is sandwiched between the 2 pieces with the tiny bolt/Nuts.

I just take the 2 bigger bolts loose that hold the whole bracket to the intake and then swap the new coil into the bracket outside the vehicle.