Klipsch 4X6s
Wait, what?? Klipsch was in the car audio game? That's news to me and I'm a big Klipsch fan.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Klipsch 4X6s
If you want to go with Kicker, you'd be much better off with the KS series instead of the CS series. Specifically the 44KSC4604.
https://www.amazon.com/Kicker-KSC4604-KSC460-Speakers-tweeters/dp/B01NBT4D3H
They're a step up from the CS or DS series, and use rubber surrounds (instead of foam) with silk dome tweeters (instead of foil or mylar). They'll sound a lot better and last much longer.
Typically if you want the best possible 4"x6", I always recommend a plate speaker which will have a 4" round midbass driver, offset slightly, and a tweeter on the other side of the plate. Like these Infinity 64CFX.
https://www.amazon.com/Infinity-Kappa-64CFX-Speaker-System/dp/B07657R646
The only downside is they're expensive. The offset round driver will have a much cleaner sound than the typical oblong oval driver that you'll find in most 4"x6"s and 6"x9"s. Polk Audio used to make a 4"x6" plate speaker like this in their DB series that was much cheaper than the Infinitys (and a typical 4 Ohm impedance instead of the weird 2.5 Ohm of the Infinitys, so they played nicer with a wider range of amps and head units) but unfortunately Polk seem to have discontinued them.
EDIT - Long story short, look for rubber or cloth surrounds and silk dome tweeters as a start. At least that's what I'd recommend. The tweeters are kind of a personal preference thing, metallic ones will be harsher and more susceptible to distortion, silk domes will be smoother sounding.
This looks like the polk you are describing.
https://www.amazon.com/Polk-Audio-4...SYN6THJXSZB&psc=1&refRID=15VTJCRJZSYN6THJXSZB
Hey guys what’s the best sounding 4x6 for sound and bass for 92 c2500
Do the ksc4604 speakers fit in the dash corners?If you want to go with Kicker, you'd be much better off with the KS series instead of the CS series. Specifically the 44KSC4604.
xc_hide_links_from_guests_guests_error_hide_media
They're a step up from the CS or DS series, and use rubber surrounds (instead of foam) with silk dome tweeters (instead of foil or mylar). They'll sound a lot better and last much longer.
Typically if you want the best possible 4"x6", I always recommend a plate speaker which will have a 4" round midbass driver, offset slightly, and a tweeter on the other side of the plate. Like these Infinity 64CFX.
xc_hide_links_from_guests_guests_error_hide_media
The only downside is they're expensive. The offset round driver will have a much cleaner sound than the typical oblong oval driver that you'll find in most 4"x6"s and 6"x9"s. Polk Audio used to make a 4"x6" plate speaker like this in their DB series that was much cheaper than the Infinitys (and a typical 4 Ohm impedance instead of the weird 2.5 Ohm of the Infinitys, so they played nicer with a wider range of amps and head units) but unfortunately Polk seem to have discontinued them.
EDIT - Long story short, look for rubber or cloth surrounds and silk dome tweeters as a start. At least that's what I'd recommend. The tweeters are kind of a personal preference thing, metallic ones will be harsher and more susceptible to distortion, silk domes will be smoother sounding.