tinfoil_hat
I'm Awesome
My master cylinder reservoir seeps fluid where it plugs in to the master. Looks like it does it at both ports. It's a very, very slow leak. I have added fluid only twice since it started almost a year ago. You can see where it trickles down the master, down the booster, and probably drips on the harness. I hose the fluid off every few days. Obviously it's the grommets where the reservoir plugs in. Is it possible to swap the reservoir without bleeding the system? It looks like enough fluid would be left in the ports if one were careful. Does it seem smarter to just do the master all at once and how hard is it to bleed the system after a master swap?