6chevy9
I'm Awesome
ok i picked up an onstar mirror for the 97. ill be moving the compass/ auto dim from the 92 into the 92. i mainly picked this mirror for a new style look + the compass and outside air temp / autodim. im working on how to wire this all together. its the 16 pin out of a 2000 something envoy. i got the air temp sensor with it anything else needed? here is the pin out i have found online.
this is not the wiring file for all gentex mirrors as mine is now fried make sure you get the correct pinout if your going to try this!
7-pin: (*required connection; **required if you have a temp display)
PIN 1 = PINK = POWER = +12 volts*
PIN 2 = BLACK = CHASSIS, GROUND*
PIN 3 = LIGHT GREEN = BACKUP LIGHTS*
If not using the backup feature, connect this to ground otherwise auto dim will not function properly.
PIN 4 = GRAY = TO AUTO DIM OUTSIDE MIRROR
PIN 5 = PINK = TO AUTO DIM OUTSIDE MIRROR
PIN 6 = DARK GREEN/WHITE = TEMP SENSOR**
PIN 7 = BLACK/WHITE = TEMP SENSOR**16 pin: (*required; **required if you have a temp display)
1 = Grey = not used
2 = Bare = Microphone
OnStar Mirrors
3 = = "Passenger Air Bag on" notification
some GM trucks - ground pin to activate icon
4 = = "Passenger Air Bag off" notification
some GM trucks - ground pin to activate icon
5 = = auto day/night signal from LH outside mirror
If you have a dimmable mirror, the rearview mirror can dim it with this and pin 16
6 = Brown = Temp probe connection**
7 = Green/Black = Temp probe connection**
8 = Black = Ground*
Common to Pin 9
9 = Light Green = Reverse Dim Inhibit
Common to Pin 8, +12V from reverse lights to disable dimming
10 = Gray = Microphone
OnStar
11 = Dark Green/White = keypad signal (out)
OnStar - multiplexed signal
12 = Light Green = keypad +5v supply (in)
OnStar
13 = Yellow = +12V switched (ignition)*
14 = Yellow/Black = Green LED signal
OnStar - apply 12v to light LED.
15 = Brown/White = Red LED signal
OnStar - apply 12v to light LED.
16 = = day/night signal to LH outside mirror
this is not the wiring file for all gentex mirrors as mine is now fried make sure you get the correct pinout if your going to try this!
7-pin: (*required connection; **required if you have a temp display)
PIN 1 = PINK = POWER = +12 volts*
PIN 2 = BLACK = CHASSIS, GROUND*
PIN 3 = LIGHT GREEN = BACKUP LIGHTS*
If not using the backup feature, connect this to ground otherwise auto dim will not function properly.
PIN 4 = GRAY = TO AUTO DIM OUTSIDE MIRROR
PIN 5 = PINK = TO AUTO DIM OUTSIDE MIRROR
PIN 6 = DARK GREEN/WHITE = TEMP SENSOR**
PIN 7 = BLACK/WHITE = TEMP SENSOR**16 pin: (*required; **required if you have a temp display)
1 = Grey = not used
2 = Bare = Microphone
OnStar Mirrors
3 = = "Passenger Air Bag on" notification
some GM trucks - ground pin to activate icon
4 = = "Passenger Air Bag off" notification
some GM trucks - ground pin to activate icon
5 = = auto day/night signal from LH outside mirror
If you have a dimmable mirror, the rearview mirror can dim it with this and pin 16
6 = Brown = Temp probe connection**
7 = Green/Black = Temp probe connection**
8 = Black = Ground*
Common to Pin 9
9 = Light Green = Reverse Dim Inhibit
Common to Pin 8, +12V from reverse lights to disable dimming
10 = Gray = Microphone
OnStar
11 = Dark Green/White = keypad signal (out)
OnStar - multiplexed signal
12 = Light Green = keypad +5v supply (in)
OnStar
13 = Yellow = +12V switched (ignition)*
14 = Yellow/Black = Green LED signal
OnStar - apply 12v to light LED.
15 = Brown/White = Red LED signal
OnStar - apply 12v to light LED.
16 = = day/night signal to LH outside mirror
Last edited: