gordinho80
I'm Awesome
Installed flowtech shortie headers... The driver side unit has a bung for an o2 sensor. My truck had a bung after the Y pipe. The sensor there is a 3 wire o2. Advance shows my o2 as being a single wire.
Should I just plug the header bung? I'm assuming the bung is an M18x1.5? Should I run the single wire? Or should I find a 3 wire?
Should I just plug the header bung? I'm assuming the bung is an M18x1.5? Should I run the single wire? Or should I find a 3 wire?
